Aircraft Structure, Surfaces, Rigging, and Systems Assemblers in Missouri
Considering working as an Aircraft Structure, Surfaces, Rigging, and Systems Assemblers in Missouri? Here’s what the data says. Assemble, fit, fasten, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
What do Aircraft Structure, Surfaces, Rigging, and Systems Assemblers Make in Missouri?
The aircraft structure, surfaces, rigging, and systems assemblers working in Missouri, the median annual wage is $64,360 per year (or about $30.94/hour).Annual wages span from $38,720 at the 10th percentile to $97,730 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $38,720 | $18.62 |
| 25th percentile | $46,880 | $22.54 |
| Median (50th) | $64,360 | $30.94 |
| 75th percentile | $73,550 | $35.36 |
| 90th percentile | $97,730 | $46.99 |
Location quotient — how concentrated this career is in Missouri relative to the national average — is 0.62, indicating fewer aircraft structure, surfaces, rigging, and systems assemblers per worker than the national average.
National Wage Comparison
Nationally, aircraft structure, surfaces, rigging, and systems assemblers earn a median of $48,162 per year ($23.16/hour), higher than the Missouri median.
Employment Outlook
National employment for 782,560 aircraft structure, surfaces, rigging, and systems assemblers nationwide. In Missouri alone, about 380 people work in this role. That trails the typical state, which employs around 560 aircraft structure, surfaces, rigging, and systems assemblers.
Top Missouri Metros for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers
The metro areas below employ the most aircraft structure, surfaces, rigging, and systems assemblers in Missouri.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| St. Louis, MO-IL | 380 | $70,080 |
Top States for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers Employment
These states have the highest employment of aircraft structure, surfaces, rigging, and systems assemblers work.
| State | Number Employed |
|---|---|
| Kansas | 10,470 |
| Washington | 4,760 |
| Texas | 3,260 |
| Georgia | 3,030 |
| California | 1,720 |
| Florida | 1,330 |
| Pennsylvania | 1,140 |
| Alabama | 780 |
| North Carolina | 660 |
| Arizona | 640 |
| Arkansas | 580 |
| Oregon | 560 |
| Missouri | 380 |
| Oklahoma | 280 |
| New York | 260 |
| Connecticut | 240 |
| Utah | 240 |
| Michigan | 210 |
| Colorado | 170 |
| Idaho | 130 |
Highest-Paying States for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers
Where aircraft structure, surfaces, rigging, and systems assemblers earn the most: aircraft structure, surfaces, rigging, and systems assemblers.
| State | Annual Median Salary |
|---|---|
| Washington | $93,550 |
| Connecticut | $82,280 |
| Texas | $81,130 |
| Pennsylvania | $78,570 |
| Colorado | $68,230 |
| Arizona | $66,930 |
| Georgia | $65,580 |
| Missouri | $64,360 |
| Florida | $62,770 |
| Alabama | $62,010 |
Skills
The most important aircraft structure, surfaces, rigging, and systems assemblers skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Core knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
Top abilities for aircraft structure, surfaces, rigging, and systems assemblers, rated on an importance scale of 0 to 5:
Daily Tasks
Aircraft Structure, Surfaces, Rigging, and Systems Assemblers typically:
- Assemble parts, fittings, or subassemblies on aircraft, using layout tools, hand tools, power tools, or fasteners, such as bolts, screws, rivets, or clamps.
- Read blueprints, illustrations, or specifications to determine layouts, sequences of operations, or identities or relationships of parts.
- Attach brackets, hinges, or clips to secure or support components or subassemblies, using bolts, screws, rivets, chemical bonding, or welding.
- Inspect or test installed units, parts, systems, or assemblies for fit, alignment, performance, defects, or compliance with standards, using measuring instruments or test equipment.
- Adjust, repair, rework, or replace parts or assemblies to ensure proper operation.
- Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance.
- Fabricate parts needed for assembly or installation, using shop machinery or equipment.
- Layout and mark reference points and locations for installation of parts or components, using jigs, templates, or measuring and marking instruments.
- Clean, oil, or coat system components, as necessary, before assembly or attachment.
- Assemble prefabricated parts to form subassemblies.
- Set, align, adjust, or synchronize aircraft armament or rigging or control system components to established tolerances or requirements, using sighting devices and hand tools.
- Join structural assemblies, such as wings, tails, or fuselage.
Work Activities
- Controlling Machines and Processes
- Monitoring Processes, Materials, or Surroundings
- Getting Information
- Inspecting Equipment, Structures, or Materials
- Documenting/Recording Information
- Handling and Moving Objects
- Updating and Using Relevant Knowledge
- Organizing, Planning, and Prioritizing Work
- Thinking Creatively
- Communicating with Supervisors, Peers, or Subordinates
- Making Decisions and Solving Problems
- Establishing and Maintaining Interpersonal Relationships
Tools & Technology
Software and systems commonly involved: Hot technologies: Microsoft Excel
What Major Will Prepare You For This Career?
Several college majors map to this occupation:
- Vehicle Maintenance & Repair
Featured schools near , edit
Related Careers
Related occupations to aircraft structure, surfaces, rigging, and systems assemblers include:
- Electro-Mechanical and Mechatronics Technologists and Technicians
- Sheet Metal Workers
- Avionics Technicians
- Electric Motor, Power Tool, and Related Repairers
- Aircraft Mechanics and Service Technicians
- Control and Valve Installers and Repairers, Except Mechanical Door
Also Known As
A&P Technician (Airframe and Powerplant Technician), Aerospace Assembler, Aircraft De-Icer Installer, Aircraft Fuselage Framer, Aircraft Layout Worker, Aircraft Line Assembler, Aircraft Part Assembler, Aircraft Parts Assembler, Aircraft Powerplant Repairer, Aircraft Riveter, Aircraft Sheet Metal Mechanic, Aircraft Structure Assembler, Aircraft Structures and Surfaces Assembler, Armament Aircraft Mechanic, Assembler.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 51-2011.00
Course Advisor provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. The displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© Course Advisor – All Rights Reserved.