Aircraft Structure, Surfaces, Rigging, and Systems Assemblers in Kansas
Want to work as an Aircraft Structure, Surfaces, Rigging, and Systems Assemblers in Kansas? Below are the key facts. Assemble, fit, fasten, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
What do Aircraft Structure, Surfaces, Rigging, and Systems Assemblers Make in Kansas?
For aircraft structure, surfaces, rigging, and systems assemblers working in Kansas, the median annual wage is $57,970 per year (or roughly $27.87/hour).Pay can range from $50,810 at the 10th percentile to $75,010 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $50,810 | $24.43 |
| 25th percentile | $57,780 | $27.78 |
| Median (50th) | $57,970 | $27.87 |
| 75th percentile | $75,010 | $36.06 |
| 90th percentile | $75,010 | $36.06 |
Location quotient — how concentrated this career is in Kansas compared to the national average — is 34.31, meaning that aircraft structure, surfaces, rigging, and systems assemblers are more concentrated here than the national average.
National Wage Comparison
Nationally, aircraft structure, surfaces, rigging, and systems assemblers earn a median of $48,162 per year ($23.16/hour), above the Kansas median.
Employment Outlook
Nationally, total employment in this occupation is 782,560 aircraft structure, surfaces, rigging, and systems assemblers across the United States. In Kansas alone, approximately 10,470 people work in this role. That’s higher than the typical state, which employs around 560 aircraft structure, surfaces, rigging, and systems assemblers.
Top Kansas Metros for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers
These are the Kansas metros with the most aircraft structure, surfaces, rigging, and systems assemblers in Kansas.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| Wichita, KS | 10,100 | $57,970 |
Top States for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers Employment
View the states that employ the most aircraft structure, surfaces, rigging, and systems assemblers work.
| State | Number Employed |
|---|---|
| Kansas | 10,470 |
| Washington | 4,760 |
| Texas | 3,260 |
| Georgia | 3,030 |
| California | 1,720 |
| Florida | 1,330 |
| Pennsylvania | 1,140 |
| Alabama | 780 |
| North Carolina | 660 |
| Arizona | 640 |
| Arkansas | 580 |
| Oregon | 560 |
| Missouri | 380 |
| Oklahoma | 280 |
| New York | 260 |
| Connecticut | 240 |
| Utah | 240 |
| Michigan | 210 |
| Colorado | 170 |
| Idaho | 130 |
Highest-Paying States for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers
Where aircraft structure, surfaces, rigging, and systems assemblers earn the most: aircraft structure, surfaces, rigging, and systems assemblers.
| State | Annual Median Salary |
|---|---|
| Washington | $93,550 |
| Connecticut | $82,280 |
| Texas | $81,130 |
| Pennsylvania | $78,570 |
| Colorado | $68,230 |
| Arizona | $66,930 |
| Georgia | $65,580 |
| Missouri | $64,360 |
| Florida | $62,770 |
| Alabama | $62,010 |
Skills
Top aircraft structure, surfaces, rigging, and systems assemblers skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Core knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
The abilities that matter most for aircraft structure, surfaces, rigging, and systems assemblers, rated on an importance scale of 0 to 5:
Daily Tasks
Common tasks include:
- Assemble parts, fittings, or subassemblies on aircraft, using layout tools, hand tools, power tools, or fasteners, such as bolts, screws, rivets, or clamps.
- Read blueprints, illustrations, or specifications to determine layouts, sequences of operations, or identities or relationships of parts.
- Attach brackets, hinges, or clips to secure or support components or subassemblies, using bolts, screws, rivets, chemical bonding, or welding.
- Inspect or test installed units, parts, systems, or assemblies for fit, alignment, performance, defects, or compliance with standards, using measuring instruments or test equipment.
- Adjust, repair, rework, or replace parts or assemblies to ensure proper operation.
- Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance.
- Fabricate parts needed for assembly or installation, using shop machinery or equipment.
- Layout and mark reference points and locations for installation of parts or components, using jigs, templates, or measuring and marking instruments.
- Clean, oil, or coat system components, as necessary, before assembly or attachment.
- Assemble prefabricated parts to form subassemblies.
- Set, align, adjust, or synchronize aircraft armament or rigging or control system components to established tolerances or requirements, using sighting devices and hand tools.
- Join structural assemblies, such as wings, tails, or fuselage.
Work Activities
- Controlling Machines and Processes
- Monitoring Processes, Materials, or Surroundings
- Getting Information
- Inspecting Equipment, Structures, or Materials
- Documenting/Recording Information
- Handling and Moving Objects
- Updating and Using Relevant Knowledge
- Organizing, Planning, and Prioritizing Work
- Thinking Creatively
- Communicating with Supervisors, Peers, or Subordinates
- Making Decisions and Solving Problems
- Establishing and Maintaining Interpersonal Relationships
Tools & Technology
Common tools and software used in this occupation include: Hot technologies: Microsoft Excel
What Major Will Prepare You For This Career?
Several college majors map to this occupation:
- Vehicle Maintenance & Repair
Featured schools near , edit
Related Careers
Other careers like aircraft structure, surfaces, rigging, and systems assemblers include:
- Electro-Mechanical and Mechatronics Technologists and Technicians
- Sheet Metal Workers
- Avionics Technicians
- Electric Motor, Power Tool, and Related Repairers
- Aircraft Mechanics and Service Technicians
- Control and Valve Installers and Repairers, Except Mechanical Door
Also Known As
A&P Technician (Airframe and Powerplant Technician), Aerospace Assembler, Aircraft De-Icer Installer, Aircraft Fuselage Framer, Aircraft Layout Worker, Aircraft Line Assembler, Aircraft Part Assembler, Aircraft Parts Assembler, Aircraft Powerplant Repairer, Aircraft Riveter, Aircraft Sheet Metal Mechanic, Aircraft Structure Assembler, Aircraft Structures and Surfaces Assembler, Armament Aircraft Mechanic, Assembler.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 51-2011.00
Course Advisor provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. The displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© Course Advisor – All Rights Reserved.