Aircraft Structure, Surfaces, Rigging, and Systems Assemblers in Florida
Thinking about a career as an Aircraft Structure, Surfaces, Rigging, and Systems Assemblers in Florida? Here’s what the data says. Assemble, fit, fasten, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
What do Aircraft Structure, Surfaces, Rigging, and Systems Assemblers Make in Florida?
For a aircraft structure, surfaces, rigging, and systems assemblers working in Florida, wages run about $62,770 per year (or roughly $30.18/hour).Pay can range from $39,360 at the 10th percentile to $85,680 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $39,360 | $18.93 |
| 25th percentile | $48,670 | $23.40 |
| Median (50th) | $62,770 | $30.18 |
| 75th percentile | $73,480 | $35.33 |
| 90th percentile | $85,680 | $41.19 |
The location quotient — a measure of how concentrated this occupation is in Florida relative to the national average — is 0.64, meaning fewer aircraft structure, surfaces, rigging, and systems assemblers per worker than the national average.
National Wage Comparison
Nationally, aircraft structure, surfaces, rigging, and systems assemblers earn a median of $48,162 per year ($23.16/hour), above the Florida median.
Employment Outlook
There are roughly 782,560 aircraft structure, surfaces, rigging, and systems assemblers across the United States. In Florida alone, approximately 1,330 people work in this role. That puts the state above the typical state, which employs around 560 aircraft structure, surfaces, rigging, and systems assemblers.
Top Florida Metros for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers
The largest metro-area employers of aircraft structure, surfaces, rigging, and systems assemblers in Florida.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| Miami-Fort Lauderdale-West Palm Beach, FL | 560 | $62,770 |
| Jacksonville, FL | 200 | $60,630 |
| Palm Bay-Melbourne-Titusville, FL | 140 | $73,040 |
| Crestview-Fort Walton Beach-Destin, FL | 70 | $62,510 |
Top States for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers Employment
View the states that employ the most aircraft structure, surfaces, rigging, and systems assemblers work.
| State | Number Employed |
|---|---|
| Kansas | 10,470 |
| Washington | 4,760 |
| Texas | 3,260 |
| Georgia | 3,030 |
| California | 1,720 |
| Florida | 1,330 |
| Pennsylvania | 1,140 |
| Alabama | 780 |
| North Carolina | 660 |
| Arizona | 640 |
| Arkansas | 580 |
| Oregon | 560 |
| Missouri | 380 |
| Oklahoma | 280 |
| New York | 260 |
| Connecticut | 240 |
| Utah | 240 |
| Michigan | 210 |
| Colorado | 170 |
| Idaho | 130 |
Highest-Paying States for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers
These states pay the most for aircraft structure, surfaces, rigging, and systems assemblers.
| State | Annual Median Salary |
|---|---|
| Washington | $93,550 |
| Connecticut | $82,280 |
| Texas | $81,130 |
| Pennsylvania | $78,570 |
| Colorado | $68,230 |
| Arizona | $66,930 |
| Georgia | $65,580 |
| Missouri | $64,360 |
| Florida | $62,770 |
| Alabama | $62,010 |
Skills
Key aircraft structure, surfaces, rigging, and systems assemblers skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Key knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
Top abilities for aircraft structure, surfaces, rigging, and systems assemblers, rated on an importance scale of 0 to 5:
Daily Tasks
Day-to-day, aircraft structure, surfaces, rigging, and systems assemblers typically:
- Assemble parts, fittings, or subassemblies on aircraft, using layout tools, hand tools, power tools, or fasteners, such as bolts, screws, rivets, or clamps.
- Read blueprints, illustrations, or specifications to determine layouts, sequences of operations, or identities or relationships of parts.
- Attach brackets, hinges, or clips to secure or support components or subassemblies, using bolts, screws, rivets, chemical bonding, or welding.
- Inspect or test installed units, parts, systems, or assemblies for fit, alignment, performance, defects, or compliance with standards, using measuring instruments or test equipment.
- Adjust, repair, rework, or replace parts or assemblies to ensure proper operation.
- Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance.
- Fabricate parts needed for assembly or installation, using shop machinery or equipment.
- Layout and mark reference points and locations for installation of parts or components, using jigs, templates, or measuring and marking instruments.
- Clean, oil, or coat system components, as necessary, before assembly or attachment.
- Assemble prefabricated parts to form subassemblies.
- Set, align, adjust, or synchronize aircraft armament or rigging or control system components to established tolerances or requirements, using sighting devices and hand tools.
- Join structural assemblies, such as wings, tails, or fuselage.
Work Activities
- Controlling Machines and Processes
- Monitoring Processes, Materials, or Surroundings
- Getting Information
- Inspecting Equipment, Structures, or Materials
- Documenting/Recording Information
- Handling and Moving Objects
- Updating and Using Relevant Knowledge
- Organizing, Planning, and Prioritizing Work
- Thinking Creatively
- Communicating with Supervisors, Peers, or Subordinates
- Making Decisions and Solving Problems
- Establishing and Maintaining Interpersonal Relationships
Tools & Technology
Technologies frequently used: Hot technologies: Microsoft Excel
What Major Will Prepare You For This Career?
Programs that train for this career include:
- Vehicle Maintenance & Repair
Featured schools near , edit
Related Careers
Other careers like aircraft structure, surfaces, rigging, and systems assemblers include:
- Electro-Mechanical and Mechatronics Technologists and Technicians
- Sheet Metal Workers
- Avionics Technicians
- Electric Motor, Power Tool, and Related Repairers
- Aircraft Mechanics and Service Technicians
- Control and Valve Installers and Repairers, Except Mechanical Door
Also Known As
A&P Technician (Airframe and Powerplant Technician), Aerospace Assembler, Aircraft De-Icer Installer, Aircraft Fuselage Framer, Aircraft Layout Worker, Aircraft Line Assembler, Aircraft Part Assembler, Aircraft Parts Assembler, Aircraft Powerplant Repairer, Aircraft Riveter, Aircraft Sheet Metal Mechanic, Aircraft Structure Assembler, Aircraft Structures and Surfaces Assembler, Armament Aircraft Mechanic, Assembler.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 51-2011.00
Course Advisor provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. The displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© Course Advisor – All Rights Reserved.