2026 Best Value Production Product Development Associate’s Degree Schools
Looking for the best-value Production Product Development associate’s degree programs in the United States? This list ranks 1038 institutions by value — the balance of cost and student outcomes, using our 2026 methodology. Each school below is scored on factors such as tuition, student debt, and post-graduation earnings to surface the strongest return on investment.
To help you make your decision, Course Advisor evaluated schools to compile this 2026 value ranking, drawing primarily on U.S. Department of Education data (IPEDS and College Scorecard). View our full ranking methodology.
Top 25 Best-Value Production Product Development Associate’s Degree Schools in the United States
Learn more about these high-value schools below:
Southeast Community College Area earned the #1 spot in this year's best-value ranking in the United States. This public school is set in Lincoln, NE. Students from in state pay about $3,444 in tuition and fees, while out-of-state students pay about $4,032. The median Production Product Development program debt is $11,650. Median earnings reach $43,405 ten years out. Set against $11,650 in median debt, that is a healthy payoff. Get the full Southeast Community College Area report
A rank of #2 makes Hennepin Technical College one of the best values in the United States. Based in Brooklyn Park, MN, Hennepin Technical College is a public institution. The average in-state cost of tuition and fees is $5,940. The median Production Product Development program debt is $9,329. Ten years after enrolling, students earn a median of $49,460. That is a strong return on a $9,329 median debt. See the full Hennepin Technical College profile
You'll get strong value at Anoka Technical College, which ranked #3 this year. Set in Anoka, MN, Anoka Technical College is a public institution. The average in-state cost of tuition and fees is $6,267. The median Production Product Development program debt is $8,692. Anoka Technical College alumni report median earnings of $47,746 a decade after entry. That is a strong return on a $8,692 median debt. Get the full Anoka Technical College report
Northcentral Technical College came in at #4 on this year's best-value Production Product Development ranking in the United States. Located in Wausau, WI, Northcentral Technical College is a public institution. Students from in state pay about $4,889 in tuition and fees, while out-of-state students pay about $7,132. Northcentral Technical College Production Product Development students take on a median of $5,250 in debt. Graduates go on to earn a median of $44,925 ten years after entry. Set against $5,250 in median debt, that is a healthy payoff. Read more about Northcentral Technical College
St Cloud Technical And Community College came in at #5 on this year's best-value Production Product Development ranking in the United States. Based in Saint Cloud, MN, St Cloud Technical And Community College is a public institution. In-state tuition and fees run about $6,124. St Cloud Technical And Community College Production Product Development students take on a median of $9,500 in debt. Ten years after enrolling, students earn a median of $46,874. That is a strong return on a $9,500 median debt. Get the full St Cloud Technical And Community College report
Amarillo College offered strong value this year, earning the #6 position. This public school is set in Amarillo, TX. In-state tuition and fees run about $2,136, with out-of-state students paying around $4,704. Typical Production Product Development student debt is $15,720. Ten years after enrolling, students earn a median of $41,302. That is a strong return on a $15,720 median debt. Read the full report on Amarillo College
South Central College came in at #7 in this year's value ranking. Located in North Mankato, MN, South Central College is a public institution. The average in-state cost of tuition and fees is $6,146. The median Production Product Development program debt is $3,666. A decade after starting, students earn a median of $45,068. That is a strong return on a $3,666 median debt. Read the full report on South Central College
Ridgewater College came in at #8 in this year's value ranking. Located in Willmar, MN, Ridgewater College is a public institution. Expect in-state tuition and fees of around $6,121. Students borrow a median of $9,750 to complete their Production Product Development program here. A decade after starting, students earn a median of $43,827. Set against $9,750 in median debt, that is a healthy payoff. More on Ridgewater College
North Dakota State College Of Science offered strong value this year, earning the #9 position. North Dakota State College Of Science is a public school based in Wahpeton, ND. The average in-state cost of tuition and fees is $5,974, with out-of-state students paying around $6,973. North Dakota State College Of Science Production Product Development students take on a median of $11,246 in debt. North Dakota State College Of Science alumni report median earnings of $50,513 a decade after entry. Weighed against typical debt, the earnings make a compelling case for value. Read more about North Dakota State College Of Science
Bellingham Technical College offered strong value this year, earning the #10 position. Bellingham Technical College is a public school based in Bellingham, WA. In-state tuition and fees run about $4,431, while out-of-state students pay about $5,809. Ten years after enrolling, students earn a median of $49,748. See the full Bellingham Technical College profile
Central Community College offered strong value this year, earning the #10 position. Set in Grand Island, NE, Central Community College is a public institution. In-state tuition and fees run about $3,360, with out-of-state students paying around $4,800. Graduates carry a median of $5,500 in student loans. Central Community College alumni report median earnings of $39,429 a decade after entry. Weighed against typical debt, the earnings make a compelling case for value. Get the full Central Community College report
Waukesha County Technical College offered strong value this year, earning the #12 position. This public school is set in Pewaukee, WI. In-state tuition and fees run about $4,803, while out-of-state students pay about $7,046. Waukesha County Technical College Production Product Development students take on a median of $9,500 in debt. Graduates go on to earn a median of $46,894 ten years after entry. That is a strong return on a $9,500 median debt. See the full Waukesha County Technical College profile
Hawkeye Community College placed #13 among the best-value Production Product Development schools in the United States. Located in Waterloo, IA, Hawkeye Community College is a public institution. The average in-state cost of tuition and fees is $6,525, with out-of-state students paying around $6,612. The median Production Product Development program debt is $7,874. Hawkeye Community College alumni report median earnings of $42,849 a decade after entry. Weighed against typical debt, the earnings make a compelling case for value. Read more about Hawkeye Community College
Ivy Tech Community College came in at #14 in this year's value ranking. Set in Indianapolis, IN, Ivy Tech Community College is a public institution. The average in-state cost of tuition and fees is $5,154, with out-of-state students paying around $9,935. Typical Production Product Development student debt is $6,599. Median earnings reach $37,186 ten years out. Set against $6,599 in median debt, that is a healthy payoff. Read more about Ivy Tech Community College
Fox Valley Technical College ranked #15 on our 2026 list of the best-value Production Product Development schools. Located in Appleton, WI, Fox Valley Technical College is a public institution. Students from in state pay about $5,040 in tuition and fees, compared with $7,283 for out-of-state students. Typical Production Product Development student debt is $7,664. Fox Valley Technical College alumni report median earnings of $45,684 a decade after entry. Set against $7,664 in median debt, that is a healthy payoff. More on Fox Valley Technical College
Thaddeus Stevens College Of Technology placed #16 among the best-value Production Product Development schools in the United States. Located in Lancaster, PA, Thaddeus Stevens College Of Technology is a public institution. Students from in state pay about $9,050 in tuition and fees. Typical Production Product Development student debt is $11,380. A decade after starting, students earn a median of $54,681. That is a strong return on a $11,380 median debt. Roughly 71% of applicants are accepted. More on Thaddeus Stevens College Of Technology
Hill College came in at #17 in this year's value ranking. Hill College is a public school based in Hillsboro, TX. Expect in-state tuition and fees of around $2,862. The median Production Product Development program debt is $12,302. A decade after starting, students earn a median of $39,572. Weighed against typical debt, the earnings make a compelling case for value. Read the full report on Hill College
Lake Area Technical Institute offered strong value this year, earning the #18 position. This public school is set in Watertown, SD. Students from in state pay about $6,718 in tuition and fees. Lake Area Technical Institute Production Product Development students take on a median of $11,001 in debt. Lake Area Technical Institute alumni report median earnings of $45,473 a decade after entry. Set against $11,001 in median debt, that is a healthy payoff. See the full Lake Area Technical Institute profile
Lake Superior College ranked #19 on our 2026 list of the best-value Production Product Development schools. This public school is set in Duluth, MN. The average in-state cost of tuition and fees is $5,785. Graduates carry a median of $13,350 in student loans. Lake Superior College alumni report median earnings of $46,449 a decade after entry. That is a strong return on a $13,350 median debt. Read the full report on Lake Superior College
Central Lakes College Brainerd came in at #20 in this year's value ranking. Set in Brainerd, MN, Central Lakes College Brainerd is a public institution. In-state tuition and fees run about $6,249. The median Production Product Development program debt is $5,500. Central Lakes College Brainerd alumni report median earnings of $42,162 a decade after entry. Set against $5,500 in median debt, that is a healthy payoff. Read more about Central Lakes College Brainerd
Moraine Park Technical College ranked #21 on our 2026 list of the best-value Production Product Development schools. Based in Fond du Lac, WI, Moraine Park Technical College is a public institution. In-state tuition and fees average $4,819, compared with $7,084 for out-of-state students. The median Production Product Development program debt is $7,000. Ten years after enrolling, students earn a median of $44,371. Weighed against typical debt, the earnings make a compelling case for value. Read the full report on Moraine Park Technical College
South Plains College offered strong value this year, earning the #22 position. Based in Levelland, TX, South Plains College is a public institution. Expect in-state tuition and fees of around $2,733, compared with $5,157 for out-of-state students. Graduates carry a median of $13,788 in student loans. A decade after starting, students earn a median of $41,276. Weighed against typical debt, the earnings make a compelling case for value. Read the full report on South Plains College
San Jacinto Community College came in at #23 in this year's value ranking. Located in Pasadena, TX, San Jacinto Community College is a public institution. Expect in-state tuition and fees of around $2,490, compared with $6,690 for out-of-state students. Students borrow a median of $11,376 to complete their Production Product Development program here. Ten years after enrolling, students earn a median of $43,062. Weighed against typical debt, the earnings make a compelling case for value. Get the full San Jacinto Community College report
Delta College landed the #24 spot for value in the United States this year. Located in University Center, MI, Delta College is a public institution. In-state tuition and fees run about $4,820, while out-of-state students pay about $7,880. Graduates carry a median of $14,075 in student loans. A decade after starting, students earn a median of $37,781. Weighed against typical debt, the earnings make a compelling case for value. Get the full Delta College report
Coffeyville Community College landed the #25 spot for value in the United States this year. Coffeyville Community College is a public school based in Coffeyville, KS. Expect in-state tuition and fees of around $3,600, compared with $4,680 for out-of-state students. Typical Production Product Development student debt is $12,838. Graduates go on to earn a median of $35,246 ten years after entry. Weighed against typical debt, the earnings make a compelling case for value. More on Coffeyville Community College
Rest of the Top 50 Best-Value Production Product Development Associate’s Degree Schools in the United States
These schools also delivered strong value this year:
Lone Star College System landed the #26 spot for value in the United States this year. Based in The Woodlands, TX, Lone Star College System is a public institution. Students from in state pay about $2,664 in tuition and fees, while out-of-state students pay about $7,512. Lone Star College System Production Product Development students take on a median of $4,562 in debt. Lone Star College System alumni report median earnings of $42,466 a decade after entry. That is a strong return on a $4,562 median debt. See the full Lone Star College System profile
Southwestern Illinois College ranked #27 on our 2026 list of the best-value Production Product Development schools. Southwestern Illinois College is a public school based in Belleville, IL. In-state tuition and fees run about $4,230, compared with $6,720 for out-of-state students. Graduates carry a median of $6,500 in student loans. Median earnings reach $36,884 ten years out. Weighed against typical debt, the earnings make a compelling case for value. Get the full Southwestern Illinois College report
Minneapolis Community And Technical College placed #28 among the best-value Production Product Development schools in the United States. Minneapolis Community And Technical College is a public school based in Minneapolis, MN. In-state tuition and fees average $6,161. Typical Production Product Development student debt is $24,036. Median earnings reach $40,086 ten years out. That is a strong return on a $24,036 median debt. Read more about Minneapolis Community And Technical College
Salem Community College offered strong value this year, earning the #29 position. Based in Carneys Point, NJ, Salem Community College is a public institution. Expect in-state tuition and fees of around $6,360, while out-of-state students pay about $10,260. Students borrow a median of $12,375 to complete their Production Product Development program here. Salem Community College alumni report median earnings of $38,020 a decade after entry. Set against $12,375 in median debt, that is a healthy payoff. See the full Salem Community College profile
Austin Community College District ranked #30 on our 2026 list of the best-value Production Product Development schools. Located in Austin, TX, Austin Community College District is a public institution. Students from in state pay about $2,550 in tuition and fees, compared with $10,590 for out-of-state students. Students borrow a median of $14,970 to complete their Production Product Development program here. Graduates go on to earn a median of $43,177 ten years after entry. Weighed against typical debt, the earnings make a compelling case for value. More on Austin Community College District
Indian Hills Community College came in at #31 in this year's value ranking. This public school is set in Ottumwa, IA. In-state tuition and fees run about $5,040, compared with $6,120 for out-of-state students. Indian Hills Community College Production Product Development students take on a median of $15,390 in debt. Ten years after enrolling, students earn a median of $40,507. Set against $15,390 in median debt, that is a healthy payoff. More on Indian Hills Community College
Itawamba Community College came in at #32 in this year's value ranking. Located in Fulton, MS, Itawamba Community College is a public institution. The average in-state cost of tuition and fees is $3,420, compared with $5,820 for out-of-state students. The median Production Product Development program debt is $10,942. Ten years after enrolling, students earn a median of $32,912. That is a strong return on a $10,942 median debt. Read the full report on Itawamba Community College
Spokane Community College offered strong value this year, earning the #33 position. Located in Spokane, WA, Spokane Community College is a public institution. In-state tuition and fees average $5,461, compared with $6,612 for out-of-state students. Typical Production Product Development student debt is $9,500. Spokane Community College alumni report median earnings of $41,984 a decade after entry. Set against $9,500 in median debt, that is a healthy payoff. Get the full Spokane Community College report
Del Mar College landed the #34 spot for value in the United States this year. Located in Corpus Christi, TX, Del Mar College is a public institution. In-state tuition and fees run about $3,500, compared with $6,050 for out-of-state students. Del Mar College Production Product Development students take on a median of $7,476 in debt. Ten years after enrolling, students earn a median of $38,656. That is a strong return on a $7,476 median debt. Get the full Del Mar College report
Linn State Technical College came in at #35 in this year's value ranking. Set in Linn, MO, Linn State Technical College is a public institution. Expect in-state tuition and fees of around $8,160, while out-of-state students pay about $14,610. Typical Production Product Development student debt is $11,474. Graduates go on to earn a median of $55,901 ten years after entry. Set against $11,474 in median debt, that is a healthy payoff. More on Linn State Technical College
Clover Park Technical College placed #36 among the best-value Production Product Development schools in the United States. Clover Park Technical College is a public school based in Lakewood, WA. In-state tuition and fees run about $6,634. Students borrow a median of $15,154 to complete their Production Product Development program here. Ten years after enrolling, students earn a median of $41,787. Set against $15,154 in median debt, that is a healthy payoff. Get the full Clover Park Technical College report
Holmes Community College landed the #37 spot for value in the United States this year. Holmes Community College is a public school based in Goodman, MS. The average in-state cost of tuition and fees is $3,710, while out-of-state students pay about $6,610. The median Production Product Development program debt is $13,191. Holmes Community College alumni report median earnings of $32,922 a decade after entry. That is a strong return on a $13,191 median debt. More on Holmes Community College
Lower Columbia College came in at #38 in this year's value ranking. Located in Longview, WA, Lower Columbia College is a public institution. The average in-state cost of tuition and fees is $4,626, with out-of-state students paying around $6,003. Students borrow a median of $14,340 to complete their Production Product Development program here. Median earnings reach $40,691 ten years out. That is a strong return on a $14,340 median debt. See the full Lower Columbia College profile
North Idaho College offered strong value this year, earning the #39 position. Located in Coeur d'Alene, ID, North Idaho College is a public institution. Expect in-state tuition and fees of around $3,396, with out-of-state students paying around $8,736. Graduates carry a median of $14,688 in student loans. A decade after starting, students earn a median of $40,081. Weighed against typical debt, the earnings make a compelling case for value. More on North Idaho College
Kirkwood Community College landed the #40 spot for value in the United States this year. This public school is set in Cedar Rapids, IA. Expect in-state tuition and fees of around $6,176, with out-of-state students paying around $8,220. Graduates carry a median of $13,500 in student loans. Ten years after enrolling, students earn a median of $41,016. Weighed against typical debt, the earnings make a compelling case for value. Read the full report on Kirkwood Community College
New Mexico State University Carlsbad placed #41 among the best-value Production Product Development schools in the United States. Based in Carlsbad, NM, New Mexico State University Carlsbad is a public institution. Students from in state pay about $1,176 in tuition and fees, while out-of-state students pay about $4,008. New Mexico State University Carlsbad Production Product Development students take on a median of $10,284 in debt. See the full New Mexico State University Carlsbad profile
Piedmont Technical College offered strong value this year, earning the #42 position. Piedmont Technical College is a public school based in Greenwood, SC. In-state tuition and fees average $4,775, compared with $6,923 for out-of-state students. Piedmont Technical College Production Product Development students take on a median of $11,625 in debt. Median earnings reach $35,768 ten years out. That is a strong return on a $11,625 median debt. More on Piedmont Technical College
Wichita Area Technical College landed the #43 spot for value in the United States this year. This public school is set in Wichita, KS. Students from in state pay about $7,237 in tuition and fees. Students borrow a median of $5,624 to complete their Production Product Development program here. Graduates go on to earn a median of $38,679 ten years after entry. Weighed against typical debt, the earnings make a compelling case for value. See the full Wichita Area Technical College profile
Iowa Central Community College offered strong value this year, earning the #44 position. Set in Fort Dodge, IA, Iowa Central Community College is a public institution. The average in-state cost of tuition and fees is $5,496, with out-of-state students paying around $7,788. Graduates carry a median of $16,135 in student loans. Graduates go on to earn a median of $42,046 ten years after entry. Weighed against typical debt, the earnings make a compelling case for value. More on Iowa Central Community College
Wiregrass Georgia Technical College placed #45 among the best-value Production Product Development schools in the United States. Wiregrass Georgia Technical College is a public school based in Valdosta, GA. Expect in-state tuition and fees of around $3,480, while out-of-state students pay about $6,048. Graduates carry a median of $10,864 in student loans. A decade after starting, students earn a median of $30,864. Set against $10,864 in median debt, that is a healthy payoff. Read the full report on Wiregrass Georgia Technical College
Skagit Valley College placed #46 among the best-value Production Product Development schools in the United States. Set in Mount Vernon, WA, Skagit Valley College is a public institution. The average in-state cost of tuition and fees is $5,400, with out-of-state students paying around $7,410. Skagit Valley College Production Product Development students take on a median of $14,056 in debt. Median earnings reach $43,505 ten years out. Weighed against typical debt, the earnings make a compelling case for value. See the full Skagit Valley College profile
Central Maine Community College landed the #47 spot for value in the United States this year. Central Maine Community College is a public school based in Auburn, ME. Students from in state pay about $4,140 in tuition and fees, with out-of-state students paying around $7,020. The median Production Product Development program debt is $14,700. Median earnings reach $42,448 ten years out. That is a strong return on a $14,700 median debt. Read more about Central Maine Community College
Des Moines Area Community College landed the #48 spot for value in the United States this year. Des Moines Area Community College is a public school based in Ankeny, IA. Expect in-state tuition and fees of around $5,790, with out-of-state students paying around $6,690. Students borrow a median of $5,500 to complete their Production Product Development program here. A decade after starting, students earn a median of $41,018. Weighed against typical debt, the earnings make a compelling case for value. Read more about Des Moines Area Community College
Metropolitan Community College Kansas City ranked #49 on our 2026 list of the best-value Production Product Development schools. Based in Kansas City, MO, Metropolitan Community College Kansas City is a public institution. In-state tuition and fees run about $3,630, while out-of-state students pay about $9,600. The median Production Product Development program debt is $12,281. Graduates go on to earn a median of $40,796 ten years after entry. Weighed against typical debt, the earnings make a compelling case for value. See the full Metropolitan Community College Kansas City profile
Milwaukee Area Technical College placed #50 among the best-value Production Product Development schools in the United States. Milwaukee Area Technical College is a public school based in Milwaukee, WI. In-state tuition and fees average $5,184, while out-of-state students pay about $7,427. Graduates carry a median of $9,500 in student loans. Ten years after enrolling, students earn a median of $41,113. That is a strong return on a $9,500 median debt. More on Milwaukee Area Technical College
Related Production Product Development Value Rankings
See value rankings for other degree levels:
- Best Value Production Product Development Schools (All Levels)
- Best Value Production Product Development Certificate Degree Schools
- Best Value Production Product Development Undergraduate Certificate Degree Schools
- Best Value Production Product Development Bachelor’s Degree Schools
- Best Value Production Product Development Graduate Certificate Degree Schools
- Best Value Production Product Development Master’s Degree Schools
- Best Value Production Product Development Doctoral Degree Schools
Ranking Methodology & Notes
The ranking above is published by Course Advisor (DMS_RANKING_2023), 2026 edition. Rankings consider the balance of cost (tuition and student debt) against student outcomes (post-graduation earnings) — a measure of return on investment — drawn primarily from the U.S. Department of Education (IPEDS and College Scorecard).
Ranking method: College Major Best Value · Scope: Nation. *Averages shown above reflect the top 1038 ranked schools only.
References
- Integrated Postsecondary Education Data System (IPEDS) — National Center for Education Statistics, U.S. Department of Education (core institutional data).
- College Scorecard — U.S. Department of Education (graduate earnings and outcomes data).
Course Advisor provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. The displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© Course Advisor – All Rights Reserved.