Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders in Ohio
Want to work as a Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders in Ohio? Here’s what the data says. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, solder, or heat treat metal products, components, or assemblies. Includes workers who operate laser cutters or laser-beam machines.
What do Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders Make in Ohio?
The welding, soldering, and brazing machine setters, operators, and tenders working in Ohio, wages run about $47,830 per year (or about $23.00/hour).Annual wages span from $37,560 at the 10th percentile to $66,710 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $37,560 | $18.06 |
| 25th percentile | $40,810 | $19.62 |
| Median (50th) | $47,830 | $23.00 |
| 75th percentile | $60,330 | $29.00 |
| 90th percentile | $66,710 | $32.07 |
The job concentration index in Ohio compared to the national average — is 2.18, indicating that welding, soldering, and brazing machine setters, operators, and tenders are more concentrated here than the national average.
National Wage Comparison
Nationally, welding, soldering, and brazing machine setters, operators, and tenders earn a median of $50,993 per year ($24.52/hour), lower than the Ohio median.
Employment Outlook
National employment for 229,159 welding, soldering, and brazing machine setters, operators, and tenders nationwide. In Ohio alone, around 2,840 people work in this role. That puts the state above the typical state, which employs around 400 welding, soldering, and brazing machine setters, operators, and tenders.
Top Ohio Metros for Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders
These are the Ohio metros with the most welding, soldering, and brazing machine setters, operators, and tenders in Ohio.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| Cleveland, OH | 550 | $47,050 |
| Cincinnati, OH-KY-IN | 320 | $47,460 |
| Columbus, OH | 270 | $50,750 |
| Akron, OH | 120 | $48,690 |
| Canton-Massillon, OH | 100 | $46,680 |
| Toledo, OH | 100 | $42,170 |
| Dayton-Kettering-Beavercreek, OH | 70 | $45,580 |
| Springfield, OH | 70 | $39,120 |
| Youngstown-Warren, OH | 60 | $40,430 |
| Mansfield, OH | 40 | $41,910 |
Top States for Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders Employment
The table below shows the states where the most welding, soldering, and brazing machine setters, operators, and tenders work.
| State | Number Employed |
|---|---|
| Michigan | 4,360 |
| Ohio | 2,840 |
| Indiana | 2,640 |
| Kentucky | 2,400 |
| Texas | 2,400 |
| California | 2,310 |
| Tennessee | 1,980 |
| Iowa | 1,650 |
| Alabama | 1,540 |
| Wisconsin | 1,210 |
| Pennsylvania | 1,030 |
| Florida | 930 |
| Georgia | 930 |
| Mississippi | 930 |
| North Carolina | 810 |
| Nebraska | 770 |
| Massachusetts | 710 |
| New York | 660 |
| Virginia | 510 |
| New Jersey | 480 |
Highest-Paying States for Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders
The highest-paying states for welding, soldering, and brazing machine setters, operators, and tenders.
| State | Annual Median Salary |
|---|---|
| Washington | $78,460 |
| Alaska | $76,860 |
| Louisiana | $66,660 |
| Maryland | $62,560 |
| Minnesota | $57,830 |
| Kentucky | $57,590 |
| New Jersey | $57,140 |
| Connecticut | $56,750 |
| Colorado | $53,580 |
| Nebraska | $53,290 |
Skills
The most important welding, soldering, and brazing machine setters, operators, and tenders skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Important knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
Top abilities for welding, soldering, and brazing machine setters, operators, and tenders, rated on an importance scale of 0 to 5:
Daily Tasks
Day-to-day, welding, soldering, and brazing machine setters, operators, and tenders typically:
- Read blueprints, work orders, or production schedules to determine product or job instructions or specifications.
- Inspect, measure, or test completed metal workpieces to ensure conformance to specifications, using measuring and testing devices.
- Record operational information on specified production reports.
- Correct problems by adjusting controls or by stopping machines and opening holding devices.
- Set up, operate, or tend welding machines that join or bond components to fabricate metal products or assemblies.
- Select torch tips, alloys, flux, coil, tubing, or wire, according to metal types or thicknesses, data charts, or records.
- Lay out, fit, or connect parts to be bonded, calculating production measurements, as necessary.
- Prepare metal surfaces or workpieces, using hand-operated equipment, such as grinders, cutters, or drills.
- Mark weld points and positions of components on workpieces, using rules, squares, templates, or scribes.
- Set dials and timing controls to regulate electrical current, gas flow pressure, heating or cooling cycles, or shut-off.
- Turn and press knobs and buttons or enter operating instructions into computers to adjust and start welding machines.
- Assemble, align, and clamp workpieces into holding fixtures to bond, heat-treat, or solder fabricated metal components.
Work Activities
- Controlling Machines and Processes
- Getting Information
- Inspecting Equipment, Structures, or Materials
- Identifying Objects, Actions, and Events
- Monitoring Processes, Materials, or Surroundings
- Handling and Moving Objects
- Operating Vehicles, Mechanized Devices, or Equipment
- Communicating with Supervisors, Peers, or Subordinates
- Making Decisions and Solving Problems
- Thinking Creatively
- Repairing and Maintaining Mechanical Equipment
- Updating and Using Relevant Knowledge
Tools & Technology
Technologies frequently used: Hot technologies: Linux
What Major Will Prepare You For This Career?
Programs that train for this career include:
- Precision Metal Working
Featured schools near , edit
Related Careers
Careers similar to welding, soldering, and brazing machine setters, operators, and tenders include:
- Electric Motor, Power Tool, and Related Repairers
- Industrial Machinery Mechanics
- Aircraft Structure, Surfaces, Rigging, and Systems Assemblers
- Electrical and Electronic Equipment Assemblers
- Engine and Other Machine Assemblers
- Structural Metal Fabricators and Fitters
Also Known As
Aluminum Welder, Arc Welding Machine Operator, Arc and Gas Welder, Billet Assembler, Braze Operator, Brazing Machine Operator, Brazing Machine Setter, Brazing Machine Setter Operator, Brazing Machine Setup Operator, Brazing Machine Tender, Builder, Certified Welder, Controlled Atmospheric Furnace Brazer, Electron Beam Machine Welder Setter, Electron Beam Welder Setter.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 51-4122.00
Course Advisor provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. The displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© Course Advisor – All Rights Reserved.