Tool and Die Makers in Puerto Rico
Considering working as a Tool and Die Makers in Puerto Rico? Below are the key facts. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists’ hand tools.
What do Tool and Die Makers Make in Puerto Rico?
The tool and die makers working in Puerto Rico, the typical annual salary is $36,410 per year (or roughly $17.50/hour).Earnings range from $25,910 at the 10th percentile to $55,980 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $25,910 | $12.46 |
| 25th percentile | $29,540 | $14.20 |
| Median (50th) | $36,410 | $17.50 |
| 75th percentile | $51,050 | $24.54 |
| 90th percentile | $55,980 | $26.92 |
The job concentration index in Puerto Rico compared to the national average — is 1.04.
National Wage Comparison
Nationally, tool and die makers earn a median of $46,356 per year ($22.29/hour), lower than the Puerto Rico median.
Employment Outlook
There are roughly 499,911 tool and die makers nationwide. In Puerto Rico alone, around 350 people work in this role. That’s below the typical state, which employs around 720 tool and die makers.
Top Puerto Rico Metros for Tool and Die Makers
These are the Puerto Rico metros with the most tool and die makers in Puerto Rico.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| San Juan-Bayamon-Caguas, PR | 200 | $32,690 |
Top States for Tool and Die Makers Employment
The table below shows the states where the most tool and die makers work.
| State | Number Employed |
|---|---|
| Michigan | 9,190 |
| Ohio | 5,460 |
| Illinois | 4,590 |
| Indiana | 3,580 |
| Wisconsin | 2,970 |
| Pennsylvania | 2,910 |
| Tennessee | 2,180 |
| Kentucky | 2,100 |
| Connecticut | 1,800 |
| Missouri | 1,680 |
| Texas | 1,550 |
| North Carolina | 1,480 |
| New York | 1,460 |
| California | 1,380 |
| Washington | 1,200 |
| Minnesota | 1,060 |
| Massachusetts | 950 |
| Alabama | 870 |
| Georgia | 760 |
| Kansas | 750 |
Highest-Paying States for Tool and Die Makers
The highest-paying states for tool and die makers.
| State | Annual Median Salary |
|---|---|
| Kansas | $81,230 |
| Washington | $78,310 |
| California | $77,800 |
| Maine | $76,500 |
| Connecticut | $76,310 |
| New Jersey | $75,920 |
| Oregon | $69,580 |
| New Hampshire | $68,210 |
| New York | $67,790 |
| Arizona | $67,580 |
Skills
The most important tool and die makers skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Key knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
Top abilities for tool and die makers, rated on an importance scale of 0 to 5:
Daily Tasks
Day-to-day, tool and die makers typically:
- Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, or dial indicators.
- Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines, or grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes.
- Visualize and compute dimensions, sizes, shapes, and tolerances of assemblies, based on specifications.
- Study blueprints, sketches, models, or specifications to plan sequences of operations for fabricating tools, dies, or assemblies.
- Fit and assemble parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools, hand tools, or welders.
- Inspect finished dies for smoothness, contour conformity, and defects.
- Select metals to be used from a range of metals and alloys, based on properties such as hardness or heat tolerance.
- Lift, position, and secure machined parts on surface plates or worktables, using hoists, vises, v-blocks, or angle plates.
- File, grind, shim, and adjust different parts to properly fit them together.
- Smooth and polish flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders.
- Measure, mark, and scribe metal or plastic stock to lay out machining, using instruments such as protractors, micrometers, scribes, or rulers.
- Conduct test runs with completed tools or dies to ensure that parts meet specifications, making adjustments as necessary.
Work Activities
- Getting Information
- Making Decisions and Solving Problems
- Communicating with Supervisors, Peers, or Subordinates
- Thinking Creatively
- Controlling Machines and Processes
- Monitoring Processes, Materials, or Surroundings
- Repairing and Maintaining Mechanical Equipment
- Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment
- Updating and Using Relevant Knowledge
- Organizing, Planning, and Prioritizing Work
- Inspecting Equipment, Structures, or Materials
- Handling and Moving Objects
Tools & Technology
Common tools and software used in this occupation include: Hot technologies: Autodesk AutoCAD, Bentley MicroStation
What Major Will Prepare You For This Career?
Related college programs include:
- Precision Metal Working
Featured schools near , edit
Related Careers
Careers similar to tool and die makers include:
- Industrial Machinery Mechanics
- Structural Metal Fabricators and Fitters
- Forging Machine Setters, Operators, and Tenders, Metal and Plastic
- Rolling Machine Setters, Operators, and Tenders, Metal and Plastic
- Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic
- Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Also Known As
Bench Tool Maker, Broach Setter, Cam Maker, Carbide Operator, Carbide Tool Maker, Cutlery and Tools Saw Maker, Die Assembler, Die Baker, Die Cutter, Die Designer, Die Finisher, Die Machinist, Die Maker, Die Mechanic, Die Repair Laborer.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 51-4111.00
Course Advisor provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. The displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© Course Advisor – All Rights Reserved.