Rolling Machine Setters, Operators, and Tenders, Metal and Plastic in Puerto Rico
Thinking about a career as a Rolling Machine Setters, Operators, and Tenders, Metal and Plastic in Puerto Rico? Here’s what you need to know. Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.
What do Rolling Machine Setters, Operators, and Tenders, Metal and Plastic Make in Puerto Rico?
For a rolling machine setters, operators, and tenders, metal and plastic working in Puerto Rico, wages run about $22,470 per year (or roughly $10.80/hour).Pay can range from $21,310 at the 10th percentile to $29,670 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $21,310 | $10.25 |
| 25th percentile | $21,950 | $10.56 |
| Median (50th) | $22,470 | $10.80 |
| 75th percentile | $27,030 | $13.00 |
| 90th percentile | $29,670 | $14.26 |
The location quotient — a measure of how concentrated this occupation is in Puerto Rico relative to the national average — is 1.49, meaning that rolling machine setters, operators, and tenders, metal and plastic are more concentrated here than the national average.
National Wage Comparison
Nationally, rolling machine setters, operators, and tenders, metal and plastic earn a median of $47,503 per year ($22.84/hour), below the Puerto Rico median.
Employment Outlook
There are roughly 425,674 rolling machine setters, operators, and tenders, metal and plastic nationwide. In Puerto Rico alone, approximately 200 people work in this role. That’s fewer than the typical state, which employs around 370 rolling machine setters, operators, and tenders, metal and plastic.
Top Puerto Rico Metros for Rolling Machine Setters, Operators, and Tenders, Metal and Plastic
The largest metro-area employers of rolling machine setters, operators, and tenders, metal and plastic in Puerto Rico.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| San Juan-Bayamon-Caguas, PR | 110 | $23,260 |
| Ponce, PR | 40 | $22,270 |
Top States for Rolling Machine Setters, Operators, and Tenders, Metal and Plastic Employment
These states have the highest employment of rolling machine setters, operators, and tenders, metal and plastic work.
| State | Number Employed |
|---|---|
| Ohio | 1,990 |
| Kentucky | 1,640 |
| Alabama | 1,490 |
| Michigan | 1,410 |
| Texas | 1,410 |
| Indiana | 1,390 |
| California | 1,350 |
| Tennessee | 1,210 |
| Pennsylvania | 800 |
| South Carolina | 730 |
| Illinois | 660 |
| Georgia | 640 |
| Virginia | 600 |
| Iowa | 560 |
| West Virginia | 540 |
| New Jersey | 510 |
| New York | 510 |
| Massachusetts | 420 |
| Arkansas | 420 |
| Washington | 370 |
Highest-Paying States for Rolling Machine Setters, Operators, and Tenders, Metal and Plastic
These states pay the most for rolling machine setters, operators, and tenders, metal and plastic.
| State | Annual Median Salary |
|---|---|
| Louisiana | $64,010 |
| Washington | $61,520 |
| Connecticut | $59,480 |
| Iowa | $56,380 |
| New Hampshire | $55,450 |
| New York | $55,000 |
| West Virginia | $53,840 |
| Minnesota | $52,980 |
| Maryland | $51,030 |
| Indiana | $51,000 |
Skills
Top rolling machine setters, operators, and tenders, metal and plastic skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Core knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
Key abilities for rolling machine setters, operators, and tenders, metal and plastic, rated on an importance scale of 0 to 5:
Daily Tasks
Rolling Machine Setters, Operators, and Tenders, Metal and Plastic typically:
- Monitor machine cycles and mill operation to detect jamming and to ensure that products conform to specifications.
- Adjust and correct machine set-ups to reduce thicknesses, reshape products, and eliminate product defects.
- Start operation of rolling and milling machines to flatten, temper, form, and reduce sheet metal sections and to produce steel strips.
- Examine, inspect, and measure raw materials and finished products to verify conformance to specifications.
- Read rolling orders, blueprints, and mill schedules to determine setup specifications, work sequences, product dimensions, and installation procedures.
- Manipulate controls and observe dial indicators to monitor, adjust, and regulate speeds of machine mechanisms.
- Set distance points between rolls, guides, meters, and stops, according to specifications.
- Calculate draft space and roll speed for each mill stand to plan rolling sequences and specified dimensions and tempers.
- Install equipment such as guides, guards, gears, cooling equipment, and rolls, using hand tools.
- Position, align, and secure arbors, spindles, coils, mandrels, dies, and slitting knives.
- Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces.
- Activate shears and grinders to trim workpieces.
Work Activities
- Controlling Machines and Processes
- Getting Information
- Inspecting Equipment, Structures, or Materials
- Making Decisions and Solving Problems
- Handling and Moving Objects
- Operating Vehicles, Mechanized Devices, or Equipment
- Identifying Objects, Actions, and Events
- Communicating with Supervisors, Peers, or Subordinates
- Monitoring Processes, Materials, or Surroundings
- Training and Teaching Others
- Repairing and Maintaining Mechanical Equipment
- Updating and Using Relevant Knowledge
Tools & Technology
Common tools and software used in this occupation include:
- Email software (electronic mail software)
- Web browser software (internet browser software)
What Major Will Prepare You For This Career?
Related college programs include:
- Precision Metal Working
Featured schools near , edit
Related Careers
Other careers like rolling machine setters, operators, and tenders, metal and plastic include:
- Industrial Machinery Mechanics
- Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic
- Forging Machine Setters, Operators, and Tenders, Metal and Plastic
- Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic
- Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic
- Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Also Known As
Bar Finish Operator, Bar Roller, Barrel Roller, Barrel Roller Operator, Bed Operator, Brass Roller, Breakdown Coordinator, Breakdown Mill Operator, Breakdown Operator, Bulldogger, Calender Operator, Caster Operator, Coiler Operator, Cold Form Operator, Cold Headerman.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 51-4023.00
Course Advisor provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. The displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© Course Advisor – All Rights Reserved.