Control and Valve Installers and Repairers, Except Mechanical Door in Puerto Rico
Considering working as a Control and Valve Installers and Repairers, Except Mechanical Door in Puerto Rico? Below are the key facts. Install, repair, and maintain mechanical regulating and controlling devices, such as electric meters, gas regulators, thermostats, safety and flow valves, and other mechanical governors.
What do Control and Valve Installers and Repairers, Except Mechanical Door Make in Puerto Rico?
For control and valve installers and repairers, except mechanical door working in Puerto Rico, the typical annual salary is $29,490 per year (or about $14.18/hour).Pay can range from $22,160 at the 10th percentile to $55,680 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $22,160 | $10.66 |
| 25th percentile | $25,300 | $12.16 |
| Median (50th) | $29,490 | $14.18 |
| 75th percentile | $47,790 | $22.98 |
| 90th percentile | $55,680 | $26.77 |
The location quotient — a measure of how concentrated this occupation is in Puerto Rico relative to the national average — is 0.36, suggesting fewer control and valve installers and repairers, except mechanical door per worker than the national average.
National Wage Comparison
Nationally, control and valve installers and repairers, except mechanical door earn a median of $69,523 per year ($33.42/hour), below the Puerto Rico median.
Employment Outlook
Nationally, total employment in this occupation is 547,335 control and valve installers and repairers, except mechanical door nationwide. In Puerto Rico alone, approximately 100 people work in this role. That’s fewer than the typical state, which employs around 560 control and valve installers and repairers, except mechanical door.
Top Puerto Rico Metros for Control and Valve Installers and Repairers, Except Mechanical Door
The largest metro-area employers of control and valve installers and repairers, except mechanical door in Puerto Rico.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| San Juan-Bayamon-Caguas, PR | 70 | $35,890 |
Top States for Control and Valve Installers and Repairers, Except Mechanical Door Employment
The table below shows the states where the most control and valve installers and repairers, except mechanical door work.
| State | Number Employed |
|---|---|
| Texas | 8,470 |
| New York | 4,380 |
| California | 4,100 |
| Michigan | 2,760 |
| Massachusetts | 1,740 |
| Pennsylvania | 1,690 |
| Minnesota | 1,390 |
| Ohio | 1,370 |
| Florida | 1,310 |
| North Carolina | 1,220 |
| Oklahoma | 1,030 |
| New Jersey | 1,000 |
| Georgia | 990 |
| Virginia | 950 |
| Maryland | 920 |
| Indiana | 910 |
| Iowa | 720 |
| Colorado | 690 |
| West Virginia | 670 |
| Tennessee | 610 |
Highest-Paying States for Control and Valve Installers and Repairers, Except Mechanical Door
The highest-paying states for control and valve installers and repairers, except mechanical door.
| State | Annual Median Salary |
|---|---|
| Alaska | $106,250 |
| Washington | $105,130 |
| North Dakota | $101,780 |
| New York | $101,230 |
| Connecticut | $98,840 |
| District of Columbia | $96,560 |
| Massachusetts | $94,880 |
| California | $94,280 |
| Michigan | $92,100 |
| Wisconsin | $90,540 |
Skills
Key control and valve installers and repairers, except mechanical door skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Core knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
The abilities that matter most for control and valve installers and repairers, except mechanical door, rated on an importance scale of 0 to 5:
Daily Tasks
Control and Valve Installers and Repairers, Except Mechanical Door typically:
- Record maintenance information, including test results, material usage, and repairs made.
- Disassemble and repair mechanical control devices or valves, such as regulators, thermostats, or hydrants, using power tools, hand tools, and cutting torches.
- Lubricate wearing surfaces of mechanical parts, using oils or other lubricants.
- Calibrate instrumentation, such as meters, gauges, and regulators, for pressure, temperature, flow, and level.
- Install, inspect and test electric meters, relays, and power sources to detect causes of malfunctions and inaccuracies, using hand tools and testing equipment.
- Test valves and regulators for leaks and accurate temperature and pressure settings, using precision testing equipment.
- Record meter readings and installation data on meter cards, work orders, or field service orders, or enter data into hand-held computers.
- Turn meters on or off to establish or close service.
- Shut off service and notify repair crews when major repairs are required, such as the replacement of underground pipes or wiring.
- Install regulators and related equipment such as gas meters, odorization units, and gas pressure telemetering equipment.
- Cut seats to receive new orifices, tap inspection ports, and perform other repairs to salvage usable materials, using hand tools and machine tools.
- Turn valves to allow measured amounts of air or gas to pass through meters at specified flow rates.
Work Activities
- Repairing and Maintaining Mechanical Equipment
- Inspecting Equipment, Structures, or Materials
- Communicating with Supervisors, Peers, or Subordinates
- Monitoring Processes, Materials, or Surroundings
- Getting Information
- Making Decisions and Solving Problems
- Evaluating Information to Determine Compliance with Standards
- Updating and Using Relevant Knowledge
- Documenting/Recording Information
- Handling and Moving Objects
- Operating Vehicles, Mechanized Devices, or Equipment
- Organizing, Planning, and Prioritizing Work
Tools & Technology
Common tools and software used in this occupation include: Hot technologies: Autodesk AutoCAD, Microsoft Access In-demand technologies: Autodesk AutoCAD
What Major Will Prepare You For This Career?
Several college majors map to this occupation:
- Heavy Equipment Maintenance
Featured schools near , edit
Related Careers
Other careers like control and valve installers and repairers, except mechanical door include:
- Mechanical Engineers
- Calibration Technologists and Technicians
- Boilermakers
- Plumbers, Pipefitters, and Steamfitters
- Electric Motor, Power Tool, and Related Repairers
- Electrical and Electronics Installers and Repairers, Transportation Equipment
Also Known As
Air Valve Mechanic, Air Valve Repairer, Automation Controls Technician, Automation and Controls Specialist, Certification Technician, Control Panel Technician (Control Panel Tech), Control Specialist, Control Systems Technician (Control Systems Tech), Control Valve Mechanic, Control Valve Technician, Controls Service Technician (Controls Service Tech), Controls Specialist, Controls Technician, Electric Meter Installer, Electric Meter Repairer.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 49-9012.00
Course Advisor provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. The displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© Course Advisor – All Rights Reserved.