Control and Valve Installers and Repairers, Except Mechanical Door in Michigan
Considering working as a Control and Valve Installers and Repairers, Except Mechanical Door in Michigan? Here’s what the data says. Install, repair, and maintain mechanical regulating and controlling devices, such as electric meters, gas regulators, thermostats, safety and flow valves, and other mechanical governors.
What do Control and Valve Installers and Repairers, Except Mechanical Door Make in Michigan?
For a control and valve installers and repairers, except mechanical door working in Michigan, wages run about $92,100 per year (or about $44.28/hour).Annual wages span from $49,080 at the 10th percentile to $106,900 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $49,080 | $23.59 |
| 25th percentile | $60,300 | $28.99 |
| Median (50th) | $92,100 | $44.28 |
| 75th percentile | $101,710 | $48.90 |
| 90th percentile | $106,900 | $51.39 |
The location quotient — a measure of how concentrated this occupation is in Michigan compared to the national average — is 2.06, indicating that control and valve installers and repairers, except mechanical door are more concentrated here than the national average.
National Wage Comparison
Nationally, control and valve installers and repairers, except mechanical door earn a median of $69,523 per year ($33.42/hour), exceeding the Michigan median.
Employment Outlook
Nationally, total employment in this occupation is 547,335 control and valve installers and repairers, except mechanical door across the United States. In Michigan alone, approximately 2,760 people work in this role. That puts the state above the typical state, which employs around 560 control and valve installers and repairers, except mechanical door.
Top Michigan Metros for Control and Valve Installers and Repairers, Except Mechanical Door
The largest metro-area employers of control and valve installers and repairers, except mechanical door in Michigan.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| Detroit-Warren-Dearborn, MI | 1,310 | $93,760 |
| Grand Rapids-Wyoming-Kentwood, MI | 230 | $81,890 |
| Lansing-East Lansing, MI | 110 | $85,390 |
| Saginaw, MI | 100 | $80,000 |
| Ann Arbor, MI | 70 | $97,760 |
| Traverse City, MI | 60 | $62,550 |
| Battle Creek, MI | 30 | $50,270 |
Top States for Control and Valve Installers and Repairers, Except Mechanical Door Employment
The table below shows the states where the most control and valve installers and repairers, except mechanical door work.
| State | Number Employed |
|---|---|
| Texas | 8,470 |
| New York | 4,380 |
| California | 4,100 |
| Michigan | 2,760 |
| Massachusetts | 1,740 |
| Pennsylvania | 1,690 |
| Minnesota | 1,390 |
| Ohio | 1,370 |
| Florida | 1,310 |
| North Carolina | 1,220 |
| Oklahoma | 1,030 |
| New Jersey | 1,000 |
| Georgia | 990 |
| Virginia | 950 |
| Maryland | 920 |
| Indiana | 910 |
| Iowa | 720 |
| Colorado | 690 |
| West Virginia | 670 |
| Tennessee | 610 |
Highest-Paying States for Control and Valve Installers and Repairers, Except Mechanical Door
Where control and valve installers and repairers, except mechanical door earn the most: control and valve installers and repairers, except mechanical door.
| State | Annual Median Salary |
|---|---|
| Alaska | $106,250 |
| Washington | $105,130 |
| North Dakota | $101,780 |
| New York | $101,230 |
| Connecticut | $98,840 |
| District of Columbia | $96,560 |
| Massachusetts | $94,880 |
| California | $94,280 |
| Michigan | $92,100 |
| Wisconsin | $90,540 |
Skills
The most important control and valve installers and repairers, except mechanical door skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Important knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
The abilities that matter most for control and valve installers and repairers, except mechanical door, rated on an importance scale of 0 to 5:
Daily Tasks
Common tasks include:
- Record maintenance information, including test results, material usage, and repairs made.
- Disassemble and repair mechanical control devices or valves, such as regulators, thermostats, or hydrants, using power tools, hand tools, and cutting torches.
- Lubricate wearing surfaces of mechanical parts, using oils or other lubricants.
- Calibrate instrumentation, such as meters, gauges, and regulators, for pressure, temperature, flow, and level.
- Install, inspect and test electric meters, relays, and power sources to detect causes of malfunctions and inaccuracies, using hand tools and testing equipment.
- Test valves and regulators for leaks and accurate temperature and pressure settings, using precision testing equipment.
- Record meter readings and installation data on meter cards, work orders, or field service orders, or enter data into hand-held computers.
- Turn meters on or off to establish or close service.
- Shut off service and notify repair crews when major repairs are required, such as the replacement of underground pipes or wiring.
- Install regulators and related equipment such as gas meters, odorization units, and gas pressure telemetering equipment.
- Cut seats to receive new orifices, tap inspection ports, and perform other repairs to salvage usable materials, using hand tools and machine tools.
- Turn valves to allow measured amounts of air or gas to pass through meters at specified flow rates.
Work Activities
- Repairing and Maintaining Mechanical Equipment
- Inspecting Equipment, Structures, or Materials
- Communicating with Supervisors, Peers, or Subordinates
- Monitoring Processes, Materials, or Surroundings
- Getting Information
- Making Decisions and Solving Problems
- Evaluating Information to Determine Compliance with Standards
- Updating and Using Relevant Knowledge
- Documenting/Recording Information
- Handling and Moving Objects
- Operating Vehicles, Mechanized Devices, or Equipment
- Organizing, Planning, and Prioritizing Work
Tools & Technology
Software and systems commonly involved: Hot technologies: Autodesk AutoCAD, Microsoft Access In-demand technologies: Autodesk AutoCAD
What Major Will Prepare You For This Career?
Programs that train for this career include:
- Heavy Equipment Maintenance
Featured schools near , edit
Related Careers
Other careers like control and valve installers and repairers, except mechanical door include:
- Mechanical Engineers
- Calibration Technologists and Technicians
- Boilermakers
- Plumbers, Pipefitters, and Steamfitters
- Electric Motor, Power Tool, and Related Repairers
- Electrical and Electronics Installers and Repairers, Transportation Equipment
Also Known As
Air Valve Mechanic, Air Valve Repairer, Automation Controls Technician, Automation and Controls Specialist, Certification Technician, Control Panel Technician (Control Panel Tech), Control Specialist, Control Systems Technician (Control Systems Tech), Control Valve Mechanic, Control Valve Technician, Controls Service Technician (Controls Service Tech), Controls Specialist, Controls Technician, Electric Meter Installer, Electric Meter Repairer.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 49-9012.00
Course Advisor provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. The displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© Course Advisor – All Rights Reserved.