Control and Valve Installers and Repairers, Except Mechanical Door in Arizona
Thinking about a career as a Control and Valve Installers and Repairers, Except Mechanical Door in Arizona? Below are the key facts. Install, repair, and maintain mechanical regulating and controlling devices, such as electric meters, gas regulators, thermostats, safety and flow valves, and other mechanical governors.
What do Control and Valve Installers and Repairers, Except Mechanical Door Make in Arizona?
For control and valve installers and repairers, except mechanical door working in Arizona, the typical annual salary is $73,610 per year (or roughly $35.39/hour).Earnings range from $50,630 at the 10th percentile to $117,550 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $50,630 | $24.34 |
| 25th percentile | $63,250 | $30.41 |
| Median (50th) | $73,610 | $35.39 |
| 75th percentile | $79,050 | $38.00 |
| 90th percentile | $117,550 | $56.52 |
The job concentration index in Arizona relative to the national average — is 0.58, suggesting fewer control and valve installers and repairers, except mechanical door per worker than the national average.
National Wage Comparison
Nationally, control and valve installers and repairers, except mechanical door earn a median of $69,523 per year ($33.42/hour), higher than the Arizona median.
Employment Outlook
National employment for 547,335 control and valve installers and repairers, except mechanical door in the U.S.. In Arizona alone, about 560 people work in this role. That’s in line with the typical state median of 560.
Top Arizona Metros for Control and Valve Installers and Repairers, Except Mechanical Door
The metro areas below employ the most control and valve installers and repairers, except mechanical door in Arizona.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| Phoenix-Mesa-Chandler, AZ | 310 | $78,420 |
Top States for Control and Valve Installers and Repairers, Except Mechanical Door Employment
These states have the highest employment of control and valve installers and repairers, except mechanical door work.
| State | Number Employed |
|---|---|
| Texas | 8,470 |
| New York | 4,380 |
| California | 4,100 |
| Michigan | 2,760 |
| Massachusetts | 1,740 |
| Pennsylvania | 1,690 |
| Minnesota | 1,390 |
| Ohio | 1,370 |
| Florida | 1,310 |
| North Carolina | 1,220 |
| Oklahoma | 1,030 |
| New Jersey | 1,000 |
| Georgia | 990 |
| Virginia | 950 |
| Maryland | 920 |
| Indiana | 910 |
| Iowa | 720 |
| Colorado | 690 |
| West Virginia | 670 |
| Tennessee | 610 |
Highest-Paying States for Control and Valve Installers and Repairers, Except Mechanical Door
Where control and valve installers and repairers, except mechanical door earn the most: control and valve installers and repairers, except mechanical door.
| State | Annual Median Salary |
|---|---|
| Alaska | $106,250 |
| Washington | $105,130 |
| North Dakota | $101,780 |
| New York | $101,230 |
| Connecticut | $98,840 |
| District of Columbia | $96,560 |
| Massachusetts | $94,880 |
| California | $94,280 |
| Michigan | $92,100 |
| Wisconsin | $90,540 |
Skills
Key control and valve installers and repairers, except mechanical door skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Core knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
Key abilities for control and valve installers and repairers, except mechanical door, rated on an importance scale of 0 to 5:
Daily Tasks
Common tasks include:
- Record maintenance information, including test results, material usage, and repairs made.
- Disassemble and repair mechanical control devices or valves, such as regulators, thermostats, or hydrants, using power tools, hand tools, and cutting torches.
- Lubricate wearing surfaces of mechanical parts, using oils or other lubricants.
- Calibrate instrumentation, such as meters, gauges, and regulators, for pressure, temperature, flow, and level.
- Install, inspect and test electric meters, relays, and power sources to detect causes of malfunctions and inaccuracies, using hand tools and testing equipment.
- Test valves and regulators for leaks and accurate temperature and pressure settings, using precision testing equipment.
- Record meter readings and installation data on meter cards, work orders, or field service orders, or enter data into hand-held computers.
- Turn meters on or off to establish or close service.
- Shut off service and notify repair crews when major repairs are required, such as the replacement of underground pipes or wiring.
- Install regulators and related equipment such as gas meters, odorization units, and gas pressure telemetering equipment.
- Cut seats to receive new orifices, tap inspection ports, and perform other repairs to salvage usable materials, using hand tools and machine tools.
- Turn valves to allow measured amounts of air or gas to pass through meters at specified flow rates.
Work Activities
- Repairing and Maintaining Mechanical Equipment
- Inspecting Equipment, Structures, or Materials
- Communicating with Supervisors, Peers, or Subordinates
- Monitoring Processes, Materials, or Surroundings
- Getting Information
- Making Decisions and Solving Problems
- Evaluating Information to Determine Compliance with Standards
- Updating and Using Relevant Knowledge
- Documenting/Recording Information
- Handling and Moving Objects
- Operating Vehicles, Mechanized Devices, or Equipment
- Organizing, Planning, and Prioritizing Work
Tools & Technology
Technologies frequently used: Hot technologies: Autodesk AutoCAD, Microsoft Access In-demand technologies: Autodesk AutoCAD
What Major Will Prepare You For This Career?
Related college programs include:
- Heavy Equipment Maintenance
Featured schools near , edit
Related Careers
Other careers like control and valve installers and repairers, except mechanical door include:
- Mechanical Engineers
- Calibration Technologists and Technicians
- Boilermakers
- Plumbers, Pipefitters, and Steamfitters
- Electric Motor, Power Tool, and Related Repairers
- Electrical and Electronics Installers and Repairers, Transportation Equipment
Also Known As
Air Valve Mechanic, Air Valve Repairer, Automation Controls Technician, Automation and Controls Specialist, Certification Technician, Control Panel Technician (Control Panel Tech), Control Specialist, Control Systems Technician (Control Systems Tech), Control Valve Mechanic, Control Valve Technician, Controls Service Technician (Controls Service Tech), Controls Specialist, Controls Technician, Electric Meter Installer, Electric Meter Repairer.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 49-9012.00
Course Advisor provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. The displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© Course Advisor – All Rights Reserved.