Coating, Painting, and Spraying Machine Setters, Operators, and Tenders in Texas
Thinking about a career as a Coating, Painting, and Spraying Machine Setters, Operators, and Tenders in Texas? Below are the key facts. Set up, operate, or tend spraying or rolling machines to coat or paint any of a wide variety of products, including glassware, cloth, ceramics, metal, plastic, paper, or wood, with lacquer, silver, copper, rubber, varnish, glaze, enamel, oil, or rust-proofing materials. Includes painters of transportation vehicles such as painters in auto body repair facilities. Excludes “Plating Machine Setters, Operators, and Tenders, Metal and Plastic” (51-4193).
What do Coating, Painting, and Spraying Machine Setters, Operators, and Tenders Make in Texas?
For coating, painting, and spraying machine setters, operators, and tenders working in Texas, wages run about $46,630 per year (or roughly $22.42/hour).Annual wages span from $32,760 at the 10th percentile to $81,660 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $32,760 | $15.75 |
| 25th percentile | $37,490 | $18.02 |
| Median (50th) | $46,630 | $22.42 |
| 75th percentile | $58,800 | $28.27 |
| 90th percentile | $81,660 | $39.26 |
The job concentration index in Texas relative to the national average — is 1.13, meaning that coating, painting, and spraying machine setters, operators, and tenders are more concentrated here than the national average.
National Wage Comparison
Nationally, coating, painting, and spraying machine setters, operators, and tenders earn a median of $46,060 per year ($22.14/hour), above the Texas median.
Employment Outlook
There are roughly 766,385 coating, painting, and spraying machine setters, operators, and tenders in the U.S.. In Texas alone, about 16,220 people work in this role. That’s higher than the typical state, which employs around 2,280 coating, painting, and spraying machine setters, operators, and tenders.
Top Texas Metros for Coating, Painting, and Spraying Machine Setters, Operators, and Tenders
The metro areas below employ the most coating, painting, and spraying machine setters, operators, and tenders in Texas.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| Dallas-Fort Worth-Arlington, TX | 5,240 | $48,800 |
| Houston-Pasadena-The Woodlands, TX | 3,800 | $46,420 |
| San Antonio-New Braunfels, TX | 1,060 | $46,550 |
| Austin-Round Rock-San Marcos, TX | 900 | $46,190 |
| Beaumont-Port Arthur, TX | 460 | $47,230 |
| Amarillo, TX | 300 | $36,910 |
| Longview, TX | 250 | $44,230 |
| Waco, TX | 230 | $46,560 |
| Corpus Christi, TX | 210 | $46,590 |
| El Paso, TX | 190 | $41,130 |
| Killeen-Temple, TX | 180 | $42,570 |
| Odessa, TX | 170 | $46,500 |
| Brownsville-Harlingen, TX | 160 | $35,660 |
| Lubbock, TX | 150 | $44,460 |
| Midland, TX | 150 | $46,890 |
| McAllen-Edinburg-Mission, TX | 130 | $36,600 |
| Tyler, TX | 120 | $44,960 |
| College Station-Bryan, TX | 110 | $44,290 |
| Texarkana, TX-AR | 90 | $39,520 |
| Wichita Falls, TX | 90 | $46,060 |
| San Angelo, TX | 70 | $45,900 |
| Sherman-Denison, TX | 70 | $44,060 |
| Abilene, TX | 60 | $44,690 |
| Victoria, TX | 40 | $45,900 |
| Laredo, TX | 30 | n/a |
Top States for Coating, Painting, and Spraying Machine Setters, Operators, and Tenders Employment
View the states that employ the most coating, painting, and spraying machine setters, operators, and tenders work.
| State | Number Employed |
|---|---|
| Texas | 16,220 |
| California | 11,190 |
| Ohio | 8,100 |
| Wisconsin | 8,040 |
| Indiana | 6,850 |
| Illinois | 6,840 |
| Michigan | 6,390 |
| Pennsylvania | 6,340 |
| Florida | 6,150 |
| North Carolina | 5,810 |
| Tennessee | 5,690 |
| Georgia | 5,520 |
| Alabama | 4,770 |
| Virginia | 4,310 |
| Washington | 4,260 |
| Minnesota | 3,630 |
| Missouri | 3,580 |
| New Jersey | 3,310 |
| Kentucky | 3,200 |
| Iowa | 2,990 |
Highest-Paying States for Coating, Painting, and Spraying Machine Setters, Operators, and Tenders
The highest-paying states for coating, painting, and spraying machine setters, operators, and tenders.
| State | Annual Median Salary |
|---|---|
| Alaska | $63,440 |
| New Jersey | $59,840 |
| Maryland | $57,860 |
| Maine | $56,770 |
| Washington | $56,630 |
| Minnesota | $54,240 |
| Hawaii | $53,350 |
| California | $51,710 |
| North Dakota | $51,380 |
| Kentucky | $50,700 |
Skills
Top coating, painting, and spraying machine setters, operators, and tenders skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Important knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
Top abilities for coating, painting, and spraying machine setters, operators, and tenders, rated on an importance scale of 0 to 5:
Daily Tasks
Coating, Painting, and Spraying Machine Setters, Operators, and Tenders typically:
- Dispose of hazardous waste in an appropriate manner.
- Hold or position spray guns to direct spray onto articles.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Fill hoppers, reservoirs, troughs, or pans with material used to coat, paint, or spray, using conveyors or pails.
- Clean equipment and work areas.
- Apply rust-resistant undercoats and caulk and seal seams.
- Start and stop operation of machines, using levers or buttons.
- Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using viscometers.
- Attach hoses or nozzles to machines, using wrenches and pliers, and make adjustments to obtain the proper dispersion of spray.
- Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
Work Activities
- Getting Information
- Identifying Objects, Actions, and Events
- Inspecting Equipment, Structures, or Materials
- Monitoring Processes, Materials, or Surroundings
- Making Decisions and Solving Problems
- Evaluating Information to Determine Compliance with Standards
- Controlling Machines and Processes
- Processing Information
- Handling and Moving Objects
- Judging the Qualities of Objects, Services, or People
- Organizing, Planning, and Prioritizing Work
- Repairing and Maintaining Mechanical Equipment
Tools & Technology
Technologies frequently used: Hot technologies: Microsoft Excel
What Major Will Prepare You For This Career?
Several college majors map to this occupation:
- Vehicle Maintenance & Repair
Featured schools near , edit
Related Careers
Other careers like coating, painting, and spraying machine setters, operators, and tenders include:
- Painters, Construction and Maintenance
- Automotive Body and Related Repairers
- Industrial Machinery Mechanics
- Maintenance Workers, Machinery
- Fiberglass Laminators and Fabricators
- Rolling Machine Setters, Operators, and Tenders, Metal and Plastic
Also Known As
Abrasive Coating Machine Operator, Abrasive Coating Machine Setup Operator, Air Drier, Air Drier Machine Operator, Aircraft Painter, Auto Body Painter (Automotive Body Painter), Auto Painter (Automobile Painter), Auto Refinisher (Automobile Refinisher), Auto Striper (Automotive Striper), Automatic Paint Sprayer Operator, Automobile Body Painter, Automotive Paint Prepper (Auto Paint Prepper), Automotive Paint Technician (Auto Paint Tech), Automotive Painter (Auto Painter), Automotive Refinish Technician (Auto Refinish Tech).
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 51-9124.00