Coating, Painting, and Spraying Machine Setters, Operators, and Tenders in Arkansas
Want to work as a Coating, Painting, and Spraying Machine Setters, Operators, and Tenders in Arkansas? Below are the key facts. Set up, operate, or tend spraying or rolling machines to coat or paint any of a wide variety of products, including glassware, cloth, ceramics, metal, plastic, paper, or wood, with lacquer, silver, copper, rubber, varnish, glaze, enamel, oil, or rust-proofing materials. Includes painters of transportation vehicles such as painters in auto body repair facilities. Excludes “Plating Machine Setters, Operators, and Tenders, Metal and Plastic” (51-4193).
What do Coating, Painting, and Spraying Machine Setters, Operators, and Tenders Make in Arkansas?
The coating, painting, and spraying machine setters, operators, and tenders working in Arkansas, wages run about $45,280 per year (or roughly $21.77/hour).Annual wages span from $33,180 at the 10th percentile to $59,510 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $33,180 | $15.95 |
| 25th percentile | $35,800 | $17.21 |
| Median (50th) | $45,280 | $21.77 |
| 75th percentile | $48,390 | $23.26 |
| 90th percentile | $59,510 | $28.61 |
The location quotient — a measure of how concentrated this occupation is in Arkansas nationwide is 1.37, meaning that coating, painting, and spraying machine setters, operators, and tenders are more concentrated here than the national average.
National Wage Comparison
Nationally, coating, painting, and spraying machine setters, operators, and tenders earn a median of $46,060 per year ($22.14/hour), below the Arkansas median.
Employment Outlook
Nationally, total employment in this occupation is 766,385 coating, painting, and spraying machine setters, operators, and tenders in the U.S.. In Arkansas alone, around 1,820 people work in this role. That trails the typical state, which employs around 2,280 coating, painting, and spraying machine setters, operators, and tenders.
Top Arkansas Metros for Coating, Painting, and Spraying Machine Setters, Operators, and Tenders
The largest metro-area employers of coating, painting, and spraying machine setters, operators, and tenders in Arkansas.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| Little Rock-North Little Rock-Conway, AR | 300 | $44,700 |
| Fayetteville-Springdale-Rogers, AR | 240 | $47,460 |
| Jonesboro, AR | 150 | $48,390 |
| Fort Smith, AR-OK | 140 | $46,520 |
| Hot Springs, AR | 60 | $43,890 |
Top States for Coating, Painting, and Spraying Machine Setters, Operators, and Tenders Employment
These states have the highest employment of coating, painting, and spraying machine setters, operators, and tenders work.
| State | Number Employed |
|---|---|
| Texas | 16,220 |
| California | 11,190 |
| Ohio | 8,100 |
| Wisconsin | 8,040 |
| Indiana | 6,850 |
| Illinois | 6,840 |
| Michigan | 6,390 |
| Pennsylvania | 6,340 |
| Florida | 6,150 |
| North Carolina | 5,810 |
| Tennessee | 5,690 |
| Georgia | 5,520 |
| Alabama | 4,770 |
| Virginia | 4,310 |
| Washington | 4,260 |
| Minnesota | 3,630 |
| Missouri | 3,580 |
| New Jersey | 3,310 |
| Kentucky | 3,200 |
| Iowa | 2,990 |
Highest-Paying States for Coating, Painting, and Spraying Machine Setters, Operators, and Tenders
Where coating, painting, and spraying machine setters, operators, and tenders earn the most: coating, painting, and spraying machine setters, operators, and tenders.
| State | Annual Median Salary |
|---|---|
| Alaska | $63,440 |
| New Jersey | $59,840 |
| Maryland | $57,860 |
| Maine | $56,770 |
| Washington | $56,630 |
| Minnesota | $54,240 |
| Hawaii | $53,350 |
| California | $51,710 |
| North Dakota | $51,380 |
| Kentucky | $50,700 |
Skills
Top coating, painting, and spraying machine setters, operators, and tenders skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Core knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
Top abilities for coating, painting, and spraying machine setters, operators, and tenders, rated on an importance scale of 0 to 5:
Daily Tasks
Coating, Painting, and Spraying Machine Setters, Operators, and Tenders typically:
- Dispose of hazardous waste in an appropriate manner.
- Hold or position spray guns to direct spray onto articles.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Fill hoppers, reservoirs, troughs, or pans with material used to coat, paint, or spray, using conveyors or pails.
- Clean equipment and work areas.
- Apply rust-resistant undercoats and caulk and seal seams.
- Start and stop operation of machines, using levers or buttons.
- Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using viscometers.
- Attach hoses or nozzles to machines, using wrenches and pliers, and make adjustments to obtain the proper dispersion of spray.
- Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
Work Activities
- Getting Information
- Identifying Objects, Actions, and Events
- Inspecting Equipment, Structures, or Materials
- Monitoring Processes, Materials, or Surroundings
- Making Decisions and Solving Problems
- Evaluating Information to Determine Compliance with Standards
- Controlling Machines and Processes
- Processing Information
- Handling and Moving Objects
- Judging the Qualities of Objects, Services, or People
- Organizing, Planning, and Prioritizing Work
- Repairing and Maintaining Mechanical Equipment
Tools & Technology
Software and systems commonly involved: Hot technologies: Microsoft Excel
What Major Will Prepare You For This Career?
Related college programs include:
- Vehicle Maintenance & Repair
Featured schools near , edit
Related Careers
Other careers like coating, painting, and spraying machine setters, operators, and tenders include:
- Painters, Construction and Maintenance
- Automotive Body and Related Repairers
- Industrial Machinery Mechanics
- Maintenance Workers, Machinery
- Fiberglass Laminators and Fabricators
- Rolling Machine Setters, Operators, and Tenders, Metal and Plastic
Also Known As
Abrasive Coating Machine Operator, Abrasive Coating Machine Setup Operator, Air Drier, Air Drier Machine Operator, Aircraft Painter, Auto Body Painter (Automotive Body Painter), Auto Painter (Automobile Painter), Auto Refinisher (Automobile Refinisher), Auto Striper (Automotive Striper), Automatic Paint Sprayer Operator, Automobile Body Painter, Automotive Paint Prepper (Auto Paint Prepper), Automotive Paint Technician (Auto Paint Tech), Automotive Painter (Auto Painter), Automotive Refinish Technician (Auto Refinish Tech).
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 51-9124.00
Course Advisor provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. The displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© Course Advisor – All Rights Reserved.