Carpenters in Connecticut
Want to work as a Carpenters in Connecticut? Here’s what you need to know. Construct, erect, install, or repair structures and fixtures made of wood and comparable materials, such as concrete forms; building frameworks, including partitions, joists, studding, and rafters; and wood stairways, window and door frames, and hardwood floors. May also install cabinets, siding, drywall, and batt or roll insulation. Includes brattice builders who build doors or brattices (ventilation walls or partitions) in underground passageways.
What do Carpenters Make in Connecticut?
For carpenters working in Connecticut, the median annual wage is $63,510 per year (or about $30.53/hour).Pay can range from $44,180 at the 10th percentile to $84,190 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $44,180 | $21.24 |
| 25th percentile | $52,390 | $25.19 |
| Median (50th) | $63,510 | $30.53 |
| 75th percentile | $79,490 | $38.22 |
| 90th percentile | $84,190 | $40.48 |
The job concentration index in Connecticut compared to the national average — is 0.75, meaning fewer carpenters per worker than the national average.
National Wage Comparison
Nationally, carpenters earn a median of $42,458 per year ($20.41/hour), exceeding the Connecticut median.
Employment Outlook
There are roughly 668,151 carpenters in the U.S.. In Connecticut alone, approximately 5,680 people work in this role. That’s below the typical state, which employs around 8,200 carpenters.
Top Connecticut Metros for Carpenters
These are the Connecticut metros with the most carpenters in Connecticut.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| Hartford-West Hartford-East Hartford, CT | 1,820 | $64,500 |
| Bridgeport-Stamford-Danbury, CT | 1,330 | $61,650 |
| New Haven, CT | 810 | $68,620 |
| Norwich-New London-Willimantic, CT | 760 | $70,260 |
| Waterbury-Shelton, CT | 500 | $61,530 |
Top States for Carpenters Employment
The table below shows the states where the most carpenters work.
| State | Number Employed |
|---|---|
| California | 106,500 |
| New York | 44,500 |
| Florida | 44,130 |
| Texas | 34,400 |
| Pennsylvania | 29,900 |
| Washington | 26,340 |
| Illinois | 24,930 |
| Michigan | 21,550 |
| Massachusetts | 19,100 |
| Virginia | 18,340 |
| Arizona | 18,290 |
| Ohio | 17,280 |
| Oregon | 16,390 |
| Missouri | 16,390 |
| Wisconsin | 15,330 |
| Indiana | 15,200 |
| Minnesota | 15,190 |
| Utah | 14,040 |
| Colorado | 13,840 |
| Nevada | 13,420 |
Highest-Paying States for Carpenters
The highest-paying states for carpenters.
| State | Annual Median Salary |
|---|---|
| Hawaii | $85,970 |
| Illinois | $76,410 |
| California | $74,820 |
| Washington | $73,260 |
| Massachusetts | $71,110 |
| District of Columbia | $66,100 |
| Alaska | $65,150 |
| Minnesota | $64,650 |
| New York | $63,660 |
| Connecticut | $63,510 |
Skills
Top carpenters skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Important knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
The abilities that matter most for carpenters, rated on an importance scale of 0 to 5:
Daily Tasks
Day-to-day, carpenters typically:
- Follow established safety rules and regulations and maintain a safe and clean environment.
- Measure and mark cutting lines on materials, using a ruler, pencil, chalk, and marking gauge.
- Assemble and fasten materials to make frameworks or props, using hand tools and wood screws, nails, dowel pins, or glue.
- Study specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required.
- Shape or cut materials to specified measurements, using hand tools, machines, or power saws.
- Verify trueness of structure, using plumb bob and level.
- Inspect ceiling or floor tile, wall coverings, siding, glass, or woodwork to detect broken or damaged structures.
- Erect scaffolding or ladders for assembling structures above ground level.
- Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters' hand or power tools.
- Maintain records, document actions, and present written progress reports.
- Remove damaged or defective parts or sections of structures and repair or replace, using hand tools.
- Maintain job records and schedule work crew.
Work Activities
- Identifying Objects, Actions, and Events
- Getting Information
- Inspecting Equipment, Structures, or Materials
- Monitoring Processes, Materials, or Surroundings
- Handling and Moving Objects
- Performing General Physical Activities
- Communicating with Supervisors, Peers, or Subordinates
- Making Decisions and Solving Problems
- Organizing, Planning, and Prioritizing Work
- Operating Vehicles, Mechanized Devices, or Equipment
- Coordinating the Work and Activities of Others
- Processing Information
Tools & Technology
Software and systems commonly involved: Hot technologies: Intuit QuickBooks
What Major Will Prepare You For This Career?
Related college programs include:
Related Careers
Related occupations to carpenters include:
- Brickmasons and Blockmasons
- Floor Layers, Except Carpet, Wood, and Hard Tiles
- Tile and Stone Setters
- Cement Masons and Concrete Finishers
- Construction Laborers
- Drywall and Ceiling Tile Installers
Also Known As
Aluminum Siding Applicator, Aluminum Siding Installer, Aluminum Siding Mechanic, Amusement and Recreational Prop Maker, Asbestos Siding Mechanic, Assembled Wood Products Repairer, Beam Builder, Boat Builder, Boat Carpenter, Boat Carpenter Mechanic, Boat Finisher, Boat Joiner, Boat Repairer, Boatwright, Bowling Alley Floors Installer.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 47-2031.00