Calibration Technologists and Technicians: Career Profile
Execute or adapt procedures and techniques for calibrating measurement devices, by applying knowledge of measurement science, mathematics, physics, chemistry, and electronics, sometimes under the direction of engineering staff. Determine measurement standard suitability for calibrating measurement devices. May perform preventive maintenance on equipment. May perform corrective actions to address identified calibration problems.
Featured schools near , edit
What Tasks Do Calibration Technologists and Technicians Perform?
The core tasks performed by calibration technologists and technicians include:
- Analyze test data to identify defects or determine calibration requirements.
- Attend conferences, workshops, or other training sessions to learn about new tools or methods.
- Calibrate devices by comparing measurements of pressure, temperature, humidity, or other environmental conditions to known standards.
- Conduct calibration tests to determine performance or reliability of mechanical, structural, or electromechanical equipment.
- Develop new calibration methods or techniques based on measurement science, analyses, or calibration requirements.
- Disassemble and reassemble equipment for inspection.
- Draw plans for developing jigs, fixtures, instruments, or other devices.
- Maintain or repair measurement devices or equipment used for calibration testing.
Related Job Titles
People in this occupation may also be known by titles such as:
- Calibration Coordinator
- Calibration Engineer
- Calibration Specialist
- Calibration Technician
- Calibration Technologist
- Certified Calibration Technician
- Diagnostic Technician (Diagnostic Tech)
- Electromechanical Equipment Tester
Job Outlook
The U.S. employs around 56,396 calibration technologists and technicians working in the United States today. Employment is projected to grow by +14.3% over the projection horizon.
Salary for Calibration Technologists and Technicians
| Statistic | Value |
|---|---|
| Annual median | $92,586 |
| Hourly median | $44.51 |
| 10th percentile | $52,569 |
| 25th percentile | $72,578 |
| 75th percentile | $112,595 |
| 90th percentile | $132,603 |
Wages vary widely based on experience, location, and industry.
How Much Do Calibration Technologists and Technicians Make in Different U.S. States?
| State | Annual median salary |
|---|---|
| New Jersey | $94,650 |
| Washington | $87,550 |
| Arizona | $82,890 |
| Oregon | $77,140 |
| Rhode Island | $76,740 |
| New Mexico | $71,760 |
| Virginia | $70,730 |
| Michigan | $70,140 |
| California | $69,840 |
| Illinois | $68,160 |
| Vermont | $67,490 |
| Tennessee | $66,390 |
| Utah | $65,920 |
| New Hampshire | $64,800 |
| Georgia | $64,550 |
| Connecticut | $64,480 |
| Indiana | $64,270 |
| Texas | $64,270 |
| Idaho | $63,590 |
| Mississippi | $63,190 |
| Arkansas | $63,080 |
| North Carolina | $62,910 |
| Massachusetts | $62,750 |
| Ohio | $62,610 |
| South Carolina | $62,470 |
| Florida | $61,930 |
| Pennsylvania | $61,680 |
| Colorado | $60,480 |
| Nevada | $60,430 |
| New York | $59,740 |
| Oklahoma | $59,630 |
| Nebraska | $59,520 |
| Maryland | $58,130 |
| Minnesota | $57,660 |
| Missouri | $55,040 |
| Kentucky | $54,090 |
| Wisconsin | $46,830 |
| Alabama | $40,310 |
| Puerto Rico | $40,150 |
Top-Paying U.S. Regions
Earnings for calibration technologists and technicians vary by region. Top regions by median wage:
| Region | Median annual wage | Share of U.S. jobs | Location quotient |
|---|---|---|---|
| Far Western US | $70,405 | 12.1% | 0.75 |
| Southwest | $66,326 | 28.3% | 2.47 |
| Middle Atlantic | $65,219 | 13.6% | 1.04 |
| New England | $64,512 | 4.5% | 1.59 |
| Great Lakes | $64,440 | 11.6% | 1.02 |
| Rocky Mountains | $60,940 | 1.8% | 0.73 |
| Plains States | $57,667 | 4.6% | 1.32 |
| Southeast | $51,741 | 21.0% | 1.23 |
Where the Jobs Cluster
| Metro area | State | Median annual wage | Employment |
|---|---|---|---|
| Seattle-Tacoma-Bellevue, WA | WA | $106,120 | 220 |
| Portland-South Portland, ME | ME | $104,480 | |
| San Francisco-Oakland-Fremont, CA | CA | $86,010 | 240 |
| Raleigh-Cary, NC | NC | $84,130 | 70 |
| Tucson, AZ | AZ | $82,890 | 110 |
| Beaumont-Port Arthur, TX | TX | $81,670 | 80 |
| Richmond, VA | VA | $80,990 | 90 |
| Corpus Christi, TX | TX | $79,480 | 70 |
Top Industries Employing Calibration Technologists and Technicians
The bulk of calibration technologists and technicians work in these industries:
| Industry | Employment | Median annual wage |
|---|---|---|
| Manufacturing | 5,260 | $66,390 |
| Professional, Scientific, and Technical Services | 4,570 | $59,220 |
| Wholesale Trade | 1,520 | $63,420 |
| Other Services (except Public Administration) | 1,030 | $66,270 |
| Transportation and Warehousing | 730 | $83,230 |
| Construction | 620 | $78,430 |
| Mining, Quarrying, and Oil and Gas Extraction | 520 | $81,000 |
| Utilities | 230 | $94,250 |
The table below shows some of the most common industries where those employed in this career field work.
Software Calibration Technologists and Technicians Use
- Operating system software: Apple macOS (hot technology)
- Computer aided design CAD software: Autodesk AutoCAD (hot technology)
- Computer aided design CAD software: Autodesk AutoCAD Civil 3D (hot technology)
- Computer aided design CAD software: Bentley MicroStation (hot technology)
- Computer aided design CAD software: Dassault Systemes SolidWorks (hot technology)
- Operating system software: Linux (hot technology)
- Spreadsheet software: Microsoft Excel (hot technology)
- Office suite software: Microsoft Office software (hot technology)
- Electronic mail software: Microsoft Outlook (hot technology)
- Presentation software: Microsoft PowerPoint (hot technology)
- Project management software: Microsoft Project (hot technology)
- Word processing software: Microsoft Word (hot technology)
Education and Training
This occupation sits in Medium Preparation Needed (Job Zone 3), reflecting the level of preparation typically expected.
Other Careers to Consider
Similar Occupations
- Electronics Engineers, Except Computer (Supplemental)
- Validation Engineers (Supplemental)
- Mechanical Engineers (Supplemental)
- Mechatronics Engineers (Supplemental)
- Aerospace Engineering and Operations Technologists and Technicians (Primary-Short)
- Electrical and Electronic Engineering Technologists and Technicians (Primary-Short)
- Electro-Mechanical and Mechatronics Technologists and Technicians (Primary-Long)
- Robotics Technicians (Primary-Short)
Where to Study
Aspiring calibration technologists and technicians typically earn programs in:
Engineering Technologies and Engineering-Related Fields
3 programs across 2 majors
About the Data
Data on this page comes from the following authoritative sources:
- U.S. Bureau of Labor Statistics — Occupational Employment and Wage Statistics (OEWS) for employment and wage data by state and industry.
- BLS Employment Projections for total employment and growth forecasts.
- O*NET (Occupational Information Network) for skills, knowledge, tasks, work activities, work context, technology, and education-zone data.
SOC code: 17-3028.00 (Calibration Technologists and Technicians).
Course Advisor provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. The displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© Course Advisor – All Rights Reserved.