Calibration Technologists and Technicians in Alabama
Want to work as a Calibration Technologists and Technicians in Alabama? Here’s what you need to know. Execute or adapt procedures and techniques for calibrating measurement devices, by applying knowledge of measurement science, mathematics, physics, chemistry, and electronics, sometimes under the direction of engineering staff. Determine measurement standard suitability for calibrating measurement devices. May perform preventive maintenance on equipment. May perform corrective actions to address identified calibration problems. Excludes “Medical Equipment Preparers” (31-9093) and “Timing Device Assemblers and Adjusters” (51-2061).
What do Calibration Technologists and Technicians Make in Alabama?
The calibration technologists and technicians working in Alabama, the median annual wage is $40,310 per year (or about $19.38/hour).Pay can range from $36,830 at the 10th percentile to $91,740 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $36,830 | $17.71 |
| 25th percentile | $37,260 | $17.92 |
| Median (50th) | $40,310 | $19.38 |
| 75th percentile | $50,880 | $24.46 |
| 90th percentile | $91,740 | $44.11 |
The job concentration index in Alabama relative to the national average — is 0.22, meaning fewer calibration technologists and technicians per worker than the national average.
National Wage Comparison
Nationally, calibration technologists and technicians earn a median of $92,586 per year ($44.51/hour), lower than the Alabama median.
Employment Outlook
There are roughly 56,396 calibration technologists and technicians in the U.S.. In Alabama alone, approximately 50 people work in this role. That’s fewer than the typical state, which employs around 230 calibration technologists and technicians.
Top States for Calibration Technologists and Technicians Employment
View the states that employ the most calibration technologists and technicians work.
| State | Number Employed |
|---|---|
| Texas | 3,680 |
| California | 1,320 |
| Florida | 850 |
| Pennsylvania | 690 |
| New York | 650 |
| Louisiana | 580 |
| Ohio | 570 |
| North Carolina | 470 |
| Indiana | 460 |
| Michigan | 450 |
| Maryland | 440 |
| Arizona | 440 |
| Puerto Rico | 380 |
| Minnesota | 370 |
| Tennessee | 330 |
| New Jersey | 310 |
| Massachusetts | 310 |
| Virginia | 300 |
| Washington | 250 |
| Colorado | 230 |
Highest-Paying States for Calibration Technologists and Technicians
These states pay the most for calibration technologists and technicians.
| State | Annual Median Salary |
|---|---|
| New Jersey | $94,650 |
| Washington | $87,550 |
| Arizona | $82,890 |
| Oregon | $77,140 |
| Rhode Island | $76,740 |
| New Mexico | $71,760 |
| Virginia | $70,730 |
| Michigan | $70,140 |
| California | $69,840 |
| Illinois | $68,160 |
Daily Tasks
Calibration Technologists and Technicians typically:
- Analyze test data to identify defects or determine calibration requirements.
- Attend conferences, workshops, or other training sessions to learn about new tools or methods.
- Calibrate devices by comparing measurements of pressure, temperature, humidity, or other environmental conditions to known standards.
- Conduct calibration tests to determine performance or reliability of mechanical, structural, or electromechanical equipment.
- Develop new calibration methods or techniques based on measurement science, analyses, or calibration requirements.
- Disassemble and reassemble equipment for inspection.
- Draw plans for developing jigs, fixtures, instruments, or other devices.
- Maintain or repair measurement devices or equipment used for calibration testing.
- Operate metalworking machines to fabricate housings, jigs, fittings, or fixtures.
- Order replacement parts for malfunctioning equipment.
- Plan sequences of calibration tests according to equipment specifications and scientific principles.
- Read blueprints, schematics, diagrams, or technical orders.
Tools & Technology
Software and systems commonly involved: Hot technologies: Apple macOS, Autodesk AutoCAD In-demand technologies: MathWorks Simulink
What Major Will Prepare You For This Career?
Related college programs include:
- Electronics Engineering
- Electromechanical Engineering
Featured schools near , edit
Related Careers
Other careers like calibration technologists and technicians include:
- Electronics Engineers, Except Computer
- Validation Engineers
- Mechanical Engineers
- Mechatronics Engineers
- Aerospace Engineering and Operations Technologists and Technicians
- Electrical and Electronic Engineering Technologists and Technicians
Also Known As
Calibration Coordinator, Calibration Engineer, Calibration Specialist, Calibration Technician, Calibration Technologist, Certified Calibration Technician, Diagnostic Technician (Diagnostic Tech), Electromechanical Equipment Tester, Electronic Instrument Testing Technician, Electronics Calibration Technician, Electronics Technician, Equipment Technician, Field Service Technician, Hydrometer Calibrator, Instrument Technician.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 17-3028.00
Course Advisor provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. The displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© Course Advisor – All Rights Reserved.