Rolling Machine Setters, Operators, and Tenders, Metal and Plastic in Vermont
Considering working as a Rolling Machine Setters, Operators, and Tenders, Metal and Plastic in Vermont? Here’s what the data says. Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.
What do Rolling Machine Setters, Operators, and Tenders, Metal and Plastic Make in Vermont?
For rolling machine setters, operators, and tenders, metal and plastic working in Vermont, wages run about $49,830 per year (or roughly $23.96/hour).Earnings range from $41,250 at the 10th percentile to $66,520 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $41,250 | $19.83 |
| 25th percentile | $43,000 | $20.67 |
| Median (50th) | $49,830 | $23.96 |
| 75th percentile | $62,040 | $29.83 |
| 90th percentile | $66,520 | $31.98 |
The job concentration index in Vermont compared to the national average — is 0.86, indicating fewer rolling machine setters, operators, and tenders, metal and plastic per worker than the national average.
National Wage Comparison
Nationally, rolling machine setters, operators, and tenders, metal and plastic earn a median of $47,503 per year ($22.84/hour), higher than the Vermont median.
Employment Outlook
National employment for 425,674 rolling machine setters, operators, and tenders, metal and plastic nationwide. In Vermont alone, around 40 people work in this role. That trails the typical state, which employs around 370 rolling machine setters, operators, and tenders, metal and plastic.
Top States for Rolling Machine Setters, Operators, and Tenders, Metal and Plastic Employment
The table below shows the states where the most rolling machine setters, operators, and tenders, metal and plastic work.
| State | Number Employed |
|---|---|
| Ohio | 1,990 |
| Kentucky | 1,640 |
| Alabama | 1,490 |
| Michigan | 1,410 |
| Texas | 1,410 |
| Indiana | 1,390 |
| California | 1,350 |
| Tennessee | 1,210 |
| Pennsylvania | 800 |
| South Carolina | 730 |
| Illinois | 660 |
| Georgia | 640 |
| Virginia | 600 |
| Iowa | 560 |
| West Virginia | 540 |
| New Jersey | 510 |
| New York | 510 |
| Massachusetts | 420 |
| Arkansas | 420 |
| Washington | 370 |
Highest-Paying States for Rolling Machine Setters, Operators, and Tenders, Metal and Plastic
The highest-paying states for rolling machine setters, operators, and tenders, metal and plastic.
| State | Annual Median Salary |
|---|---|
| Louisiana | $64,010 |
| Washington | $61,520 |
| Connecticut | $59,480 |
| Iowa | $56,380 |
| New Hampshire | $55,450 |
| New York | $55,000 |
| West Virginia | $53,840 |
| Minnesota | $52,980 |
| Maryland | $51,030 |
| Indiana | $51,000 |
Skills
Key rolling machine setters, operators, and tenders, metal and plastic skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Key knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
Key abilities for rolling machine setters, operators, and tenders, metal and plastic, rated on an importance scale of 0 to 5:
Daily Tasks
Day-to-day, rolling machine setters, operators, and tenders, metal and plastic typically:
- Monitor machine cycles and mill operation to detect jamming and to ensure that products conform to specifications.
- Adjust and correct machine set-ups to reduce thicknesses, reshape products, and eliminate product defects.
- Start operation of rolling and milling machines to flatten, temper, form, and reduce sheet metal sections and to produce steel strips.
- Examine, inspect, and measure raw materials and finished products to verify conformance to specifications.
- Read rolling orders, blueprints, and mill schedules to determine setup specifications, work sequences, product dimensions, and installation procedures.
- Manipulate controls and observe dial indicators to monitor, adjust, and regulate speeds of machine mechanisms.
- Set distance points between rolls, guides, meters, and stops, according to specifications.
- Calculate draft space and roll speed for each mill stand to plan rolling sequences and specified dimensions and tempers.
- Install equipment such as guides, guards, gears, cooling equipment, and rolls, using hand tools.
- Position, align, and secure arbors, spindles, coils, mandrels, dies, and slitting knives.
- Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces.
- Activate shears and grinders to trim workpieces.
Work Activities
- Controlling Machines and Processes
- Getting Information
- Inspecting Equipment, Structures, or Materials
- Making Decisions and Solving Problems
- Handling and Moving Objects
- Operating Vehicles, Mechanized Devices, or Equipment
- Identifying Objects, Actions, and Events
- Communicating with Supervisors, Peers, or Subordinates
- Monitoring Processes, Materials, or Surroundings
- Training and Teaching Others
- Repairing and Maintaining Mechanical Equipment
- Updating and Using Relevant Knowledge
Tools & Technology
Common tools and software used in this occupation include:
- Email software (electronic mail software)
- Web browser software (internet browser software)
What Major Will Prepare You For This Career?
Related college programs include:
- Precision Metal Working
Featured schools near , edit
Related Careers
Careers similar to rolling machine setters, operators, and tenders, metal and plastic include:
- Industrial Machinery Mechanics
- Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic
- Forging Machine Setters, Operators, and Tenders, Metal and Plastic
- Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic
- Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic
- Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Also Known As
Bar Finish Operator, Bar Roller, Barrel Roller, Barrel Roller Operator, Bed Operator, Brass Roller, Breakdown Coordinator, Breakdown Mill Operator, Breakdown Operator, Bulldogger, Calender Operator, Caster Operator, Coiler Operator, Cold Form Operator, Cold Headerman.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 51-4023.00
Course Advisor provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. The displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© Course Advisor – All Rights Reserved.